Booster Seat Owner’ s Manual READ THIS MANUAL. Do not install or use this car seat until you read and understand the instructions in this manual. FAILURE TO PROPERLY USE THIS CAR SEAT INCREASES THE RISK OF SERIOUS INJURY OR DEATH IN A SUDDEN STOP OR CRASH.
Table of Contents Registration Information . . . . . . . . . . . . . . . .3 For Recall Information . . . . . . . . . . . . . . . . .3 If You Need Help . . . . . . . . . . . . . . . . . . . . .4 Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Warnings to Parents and Other Users . . . .6-8 Assembling the Booster Seat . . . . . . . . .9-10 Assembling the Back Support . . . . . . . .11-16 Weight and Height Limits . . . . . . . . . . .17-18 Vehicle Seat Location Requirements . . . . .
Registration Information Model Number: Manufactured on: Purchase Date: Register Your Booster Seat Please fill in the above information. The model number and manufactured on (date) can be found on a label underneath your booster seat. Fill out the prepaid registration postcard attached to the seat cover and mail it today. Child restraints could be recalled for safety reasons. You must register this restraint to be reached in a recall.
If You Need Help Please contact our Customer Service Department with any questions you may have concerning parts, use, or maintenance. When you contact us, please have your product’ s model number ready so that we may help you efficiently. This number can be found on a sticker on the underside of your booster seat. 1-800-345-4109 or www.gracobaby.
Parts List Adult assembly required.
Warnings to Parents and Other Users • NO BOOSTER SEAT CAN GUARANTEE PROTECTION FROM INJURY. HOWEVER, PROPER USE OF THIS BOOSTER SEAT REDUCES THE RISK OF SERIOUS INJURY OR DEATH TO YOUR CHILD. • DO NOT INSTALL OR USE THIS BOOSTER SEAT UNTIL YOU READ AND UNDERSTAND THE INSTRUCTIONS IN THIS MANUAL AND IN YOUR VEHICLE OWNER’ S MANUAL. DO NOT let others install or use the booster seat unless they understand how to use it.
• NEVER PLACE THIS BOOSTER SEAT IN A VEHICLE SEATING LOCATION THAT HAS AN AIR BAG. If an air bag inflates, it can hit the child and booster seat with great force and cause serious injury or death to your child. Refer to your vehicle owner’ s manual for information about air bags and booster seat installation. • According to accident statistics, CHILDREN ARE SAFER WHEN PROPERLY RESTRAINED IN REAR VEHICLE SEATING POSITIONS, RATHER THAN FRONT SEATING POSITIONS.
• DO NOT MODIFY YOUR BOOSTER SEAT or use any accessories or parts supplied by other manufacturers. • NEVER USE BOOSTER SEAT IF IT HAS DAMAGED OR MISSING PARTS. DO NOT use a cut, frayed or damaged vehicle seat belt. • THE BOOSTER SEAT CAN BECOME VERY HOT IF LEFT IN THE SUN. Contact with these parts can burn your child’ s skin. Always touch the surface of any metal or plastic parts before putting your child in the booster seat.
Assembling the Booster Seat Step 1. Insert armrest into base as shown until buttons snap into slots on side of base 1 . 1 SNAP! Step 2. Select the desired armrest height for your child, then insert the height adjustment screw 2 and tighten. Repeat for other armrest. 2 Step 3. To adjust armrests, remove screw and press 3 in button on side of base as shown to raise or lower 3 . Reinsert screw and tighten. CHECK to make sure armrests are securely attached by pulling up on them.
Step 4. Slip armrest covers (on certain models) onto armrests as shown. Step 5. Your Graco booster seat is now ready to use. See page 32, “Securing Child in Vehicle with Shoulder Belt Positioning Clip”. FOR MODELS with a back support continue on to Step 6.
Assembling the Back Support (on certain models) Step 6. On certain models, your lower back support pad may not be attached to the back support. Place lower back support pad around edges of support as shown. Then fasten lower elastic strap to the metal hook on the other side of the seat pad. If your lower back support pad is already attached go to Step 6a. Step 6a. Flip head support and lower back support over as shown 1 .
Step 7. Squeeze red adjustment button and slide two pieces together until they snap into place 2 . CHECK to make sure two pieces are securely snapped together by pulling on them. 2 SNAP! Step 8. Attach elastic strap to metal hook on other side of seat pad as shown 3 . If your elastic strap is already attached you can skip to Step 9.
Step 9. Flip seat over and insert the fabric from the head support underneath the fabric on the lower back support as shown 4 . To make insertion of fabric easier, slide the upper and lower back pieces apart by squeezing the red adjustment button.
Step 10. Attach backrest to base. “U”-shaped hooks on bottom of backrest will interlock with bars on base 5 . Make sure that no part of the seat covering interferes when attaching backrest to the base.
Step 11. Once backrest is securely attached to the base, push backrest up as shown 6 .
Step 12. Your Graco booster seat is now ready to use. See page 22-29, “Using your Graco Booster Seat” and “Securing Your Child in Vehicle”.
Weight and Height Limits FAILURE TO USE booster seat in a manner appropriate for your child’ s size may increase the risk of serious injury or death. To use this Graco booster seat, your child MUST meet ALL of the following requirements: With back support (approximately 3 to 10 years old) : • weigh between 30 and 100 lbs. (mass between 13.
Without back support (approximately 4 to 10 years old) : • weigh between 40 and 100 lbs. (mass between 18 and 45 kg), and • are between 40 and 57 inches (101 and 145 cm) in height, and 2 • the shoulder belt MUST lay across child’ s shoulders in red zone as shown in 2 and the lap portion is positioned low on the childs hips, and • when sitting on the booster seat, your child’ s ears are below the top of the vehicle seat cushion / head rest.
Vehicle Seat Location Requirements IMPROPER PLACEMENT OF THE BOOSTER SEAT INCREASES THE RISK OF SERIOUS INJURY OR DEATH. Some seating positions in your vehicle may NOT be safe for this booster seat. Some vehicles do not have any seating positions that can be used safely with the booster seat. If you are not sure where to place the booster seat in your vehicle, consult your vehicle owner’ s manual or call Graco Children's Products Inc., at 1-800-345-4109.
Vehicle Seat Belt Requirements MANY SEAT BELT SYSTEMS ARE NOT SAFE TO USE WITH THE BOOSTER SEAT. Pay careful attention to these systems; some of the seat belts that are NOT safe to use look very much like seat belts that are safe to use. If you are unsure, consult your vehicle owner’ s manual or call Graco Children's Products Inc., at 1-800-345-4109.
UNSAFE Vehicle Seat Belt Systems DO NOT USE ANY OF THE FOLLOWING VEHICLE BELT SYSTEMS. • NEVER use a lap-only belt. • NEVER use a Passive Restraint Lap or Shoulder Belt Mounted on Door • NEVER use a Passive Restraint Lap Belt with Motorized Shoulder Belt NEVER use vehicle belts that are attached to the door in any way or that move along a track to automatically surround the passenger when the door is closed.
Using your Graco Booster Seat FAILURE TO PROPERLY SECURE YOUR CHILD AND THE BOOSTER SEAT IN YOUR VEHICLE INCREASES THE RISK OF SERIOUS INJURY OR DEATH IN THE EVENT OF A SHARP TURN, SUDDEN STOP OR CRASH. WARNING: Use only 1 the vehicle’ s lap and shoulder belt system when restraining the child in this booster seat 1 . 2 NEVER use a vehicle lap-only belt across front of child 2 .
Vehicle belts MUST lay flat against child and MUST not be twisted. 3 DO NOT use shoulder belt loose or positioned under child’ s arm 3 . DO NOT position vehicle 4 belt over top of the armrests 4 . It must pass underneath the armrests. Make sure vehicle belt is NOT twisted. Lap portion of lap/shoulder belt MUST be low and snug on hips, just touching thighs. DO NOT allow child to slide down in booster seat 5 . 5 If child will not keep vehicle restraint properly positioned, DO NOT use this booster seat.
Vehicle seat headrest must not interfere with booster seat head support. The front of booster seat MUST NOT hang over front of vehicle seat 6 . 6 The back of the booster seat MUST fit tight against the vehicle seat back as shown 7 .
Booster Seat Positions Your booster seat has two positions as shown. 1 Upright 2 Reclined The back of the booster seat MUST fit tight against the vehicle seat back as shown in 3 in either the first or second position. 3 DO NOT USE booster seat beyond reclined position 2 .
Securing Your Child in Vehicle 1. Place booster seat firmly against the back of a forward-facing vehicle seat equipped with a lap/shoulder belt only 1 . 2. Have your child sit in booster seat with their back flat against back of booster seat.
3. Position shoulder belt through the shoulder belt guide shown in 2 , NOT as shown in 3 . Fasten buckle and pull up on the shoulder belt to tighten.
4. To ensure the correct 4 head support height is obtained, the bottom of the headrest MUST be even with the top of child’ s shoulders as shown in 4 and the shoulder belt must be positioned in the red zone as shown in 5 . The lap belt portion MUST pass under the armrests and be positioned low on the hips.
5. If the belt lays across child’ s neck, head or face 6 , readjust head support height. Follow instructions on page 30, “Adjusting the Head Support”.
Adjusting the Head Support BEFORE adjusting the head support height, have your child lean forward slightly. Squeeze the red adjustment button on top of seat and pull back support up until it snaps into one of the 6 height positions. Back of seat To lower, squeeze red adjustment button and push down. CHECK to make sure it is securely snapped into one of the 6 height positions by pulling up on head support.
Removing the Back Support (on certain models) to Use as Backless Booster To use booster seat without back support: Remove back support as shown. “U”-shaped hooks on bottom of back support are interlocked with bars on base. Lift back support off base.
Securing Child in Vehicle with Shoulder Belt Positioning Clip The shoulder belt MUST lay across child’ s shoulders in red zone as shown. If shoulder belt lays outside this zone, the shoulder belt positioning clip MUST be used. To attach clip to booster seat: 1. Insert the loop end of strap around verticla bar on rear of seat as shown in 1 . The shoulder belt positioning clip MUST be attached onto the vertical bar of the base closest to where the vehicle shoulder belt lays across the child.
2. Pass the clip and strap through the loop end as shown in 2 and pull strap up 3 . NOTE: Free end of strap should face front of seat.
3. Slide the vehicle shoulder belt onto the clip as shown in 4 and pull strap down to tighten clip against child’ s shoulder. The lap belt portion MUST pass under the armrests and be positioned low on the hips. The belt MUST NOT be twisted.
Rear view of child sitting in seat 5 Shoulder belt positioning clip 4. For warnings on vehicle belt positions, see page 22-24, “Using your Graco Booster Seat”.
Additional Information Airplane Use This restraint is not certified for aircraft use because there are no shoulder belts available in an aircraft. Cupholders Cupholders are included on both sides of the seat.
Instruction Sheet Storage Your instruction sheet can stored on the bottom of the seat as shown. o OB wnoster er ’s Sea M t an ual M od el 84 91 Do , 84 no t ins RE 93 , FA unde tal AD 8495 IN ILUR rst l or an us THIS , 84 CR 96 EA E d thee thi M AN , 84 DE SETO s PR instrucar 97 UA AT S TH OP sea , 84 H IN E RIER ction t un L. 98 LY s in til A SU SK DD OFUSE this you © 200 EN SE TH ma read 2 Gr ST RIOUIS CAnual. and aco OP S 400 OR IN R SE 3-5 JU -02 CR RYAT AS OR H.
To Remove Seat Cover 1. Remove elastic loops and hooks from seat as shown 1 . 1 On some models, there is a plastic clip 2 in the front of the seat pad on the base that will need to be removed before washing. 2 2. Machine wash cover in cold water on delicate cycle and drip-dry. DO NOT USE BLEACH. 3. To put the seat cover back on, reverse preceding instructions.
Body Pillows (on certain models) Body Pillows are included with some models. Insert body pillows exactly as shown. DO NOT use any other pillows other than those provided by Graco.
Replacement Parts To purchase parts or accessories or for warranty information in the United States, please contact us at the following: www.gracobaby.
Asiento para niños Manual del propietario LEA ESTE MANUAL. No instale ni use este asiento de seguridad infantil hasta que haya leí do y entendido las instrucciones en este manual. NO USAR ESTE ASIENTO DE SEGURIDAD INFANTIL DE MANERA CORRECTA AUMENTA EL RIESGO DE LESIONES GRAVES O LA MUERTE EN UNA PARADA REPENTINA O UN ACCIDENTE.
Índice de materias Información de inscripción . . . . . . . . . . . . . . . . . . . . .3 Información sobre retiradas . . . . . . . . . . . . . . . . . . . . .3 Si necesita ayuda . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Lista de piezas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Advertencias a padres y otros usuarios . . . . . . . . . . .6-8 Montar del asiento para niños . . . . . . . . . . . . . . . .9-10 Montar el respaldo . . . . . . . . . . . . . . . . . . . . . . .
Información de inscripción Número de modelo: Fabricado en: Fecha de compra: Inscriba su asiento para niños Complete la información indicada arriba. El número de modelo y la fecha de fabricación pueden encontrarse en la etiqueta debajo de su asiento para niños. Rellene la postal prefranqueada de inscripción adjunta a la funda de la silla y envíela hoy mismo. Se podrá efectuar retiradas de asientos de seguridad infantil por razones de seguridad.
Si necesita ayuda Póngase en contacto con nuestro Departamento de Servicio al Cliente con cualquier pregunta que tenga sobre piezas, el uso o el mantenimiento. Cuando se pone en contacto con nosotros, tenga a mano el número de modelo de su producto para que le podamos ayudar de manera eficaz. Este número se puede encontrar en una etiqueta en el lado inferior de su asiento para niños. 1-800-345-4109 o www.gracobaby.
Lista de piezas Se requiere el montaje por un adulto.
Advertencias a padres y otros usuarios • NINGÚN ASIENTO DE SEGURIDAD PARA AUTOMÓVIL PUEDE GARANTIZAR LA PROTECCIÓN CONTRA LESIONES EN TODAS LAS SITUACIONES. SIN EMBARGO, EL USO CORRECTO DE ESTE ASIENTO DE SEGURIDAD PARA AUTOMÓVIL REDUCE EL RIESGO DE QUE SU NIÑO SUFRA LESIONES SERIAS O LA MUERTE. • NO INSTALE NI USE ESTE ASIENTO PARA NIÑOS ANTES DE LEER Y ENTENDER LAS INSTRUCCIONES EN ESTE MANUAL Y EN EL MANUAL DEL PROPIETARIO DE SU VEHÍ CULO.
• NUNCA COLOQUE ESTA ASIENTO PARA NIÑOS EN UN ASIENTO DEL VEHÍ CULO EQUIPADO CON BOLSA DE AIRE. Si la bolsa de aire se infla, puede golpear al niño y a el asiento para niños con mucha fuerza y puede causar lesiones graves o la muerte de su niño. Refiérase al manual del propietario de su vehí culo para información sobre bolsas de aire y la instalación de asiento para niños.
• REEMPLACE EL ASIENTO PARA NIÑOS DESPUÉS DE UN ACCIDENTE DE CUALQUIER TIPO. Un accidente puede causar daños ocultos en el asiento para niños. • NO MODIFIQUE SU ASIENTO PARA NIÑOS ni use ningún accesorio o pieza proporcionados por otros fabricantes. • NUNCA USE UN ASIENTO PARA NIÑOS QUE TENGA PIEZAS DAÑADAS O FALTANTES. NO use un cinturón de seguridad cortado, desgastado o dañado. • EL ASIENTO PARA NIÑOS PUEDE CALENTARSE MUCHO SI SE DEJA AL SOL. El contacto con estas piezas puede quemar la piel de su niño.
Montar del asiento para niños Paso 1. Inserte el apoyabrazos en la base como se indica hasta que los botones se traben en las ranuras de la base lateral 1 . 1 ¡ CLIC! Paso 2. Seleccione la altura deseada del apoyabrazos para su niño, luego inserte el tornillo de 2 ajuste de la altura 2 y ajústelo. Repita el procedimiento en el otro apoyabrazos. Paso 3. Para ajustar el apoyabrazos, saque los tornillos y oprima el 3 botón en el costado de la base como se indica para subirlo o bajarlo 3 .
Paso 4. Deslice las fundas de los apoyabrazos (en ciertos modelos) en los apoyabrazos, como se indica. Paso 5. Su asiento para niños de Graco ya está lista para usar. Vea la página 32, "Sujetar a su niño en el vehí culo con el clip de colocación del cinturón de hombro". PARA LOS MODELOS con respaldo, siga con el Paso 6.
Paso 6. Montar el respaldo (en ciertos modelos) En ciertos modelos, es posible que la almohadilla inferior del respaldo no esté sujeta al respaldo. Coloque la almohadilla inferior del respaldo alrededor de los bordes de apoyo, como indica la figura. Luego ajuste la correa elástica inferior al gancho de metal que está en el lado opuesto de la almohadilla del asiento. Si ya sujetó la almohadilla del respaldo, dirí jase al Paso 6a. Paso 6a. De la vuelta al apoyacabezas y respaldo como se indica 1 .
Paso 7. Apriete el botón rojo de ajuste y junte las dos piezas hasta que encajen en su sitio 2 . VERIFIQUE que las dos piezas estén bien conectadas, jalando las mismas. 2 ¡ CLIC! Paso 8. Sujete la correa de elastica como se indica 3 . Si ya sujetó la correa elástica, puede dirigirse directamente el Paso 9.
Paso 9. De la vuelta al asiento e inserte la tela del apoyacabezas debajo de la tela del respaldo como se indica 4 . Para facilitar la inserción de la tela, separe las piezas superior e inferior del respaldo, apretando el botón rojo de ajuste.
Paso 10. Conecte el respaldo a la base. Los ganchos en forma de "U" en el fondo del respaldo se engancharán en las barras de la base 5 . Asegúrese que ninguna pieza de la funda del asiento interfiera con la conexión del respaldo a la base.
Paso 11. Una vez que el respaldo está bien conectado a la base, suba el mismo como se indica 6 .
Paso 12. Su asiento para niños de Graco ya está lista para usar. Vea las páginas 22 a 29, "Usar su asiento para niños de Graco" y "Sujetar a su niño en el vehí culo".
Lí mites de altura y peso NO USAR el asiento para niños de manera apropiada para el tamaño de su niño podrá aumentar el riesgo de lesiones graves o la muerte. Para usar este asiento para niños de Graco, su niño DEBE cumplir con TODOS los requisitos siguientes: Con respaldo (de 3 a 10 años, aproximadamente): • o debe pesar entre 30 y 100 libras (13.
Sin respaldo (de 4 a 10 años, aproximadamente): • debe pesar entre 40 y 100 libras (18 y 45 kg), y • medir entre 40 y 57 pulgadas (101 y 145 cm) de altura, y 2 • el cinturón de hombro DEBE cruzar los hombros del niño en la zona roja como se indica en 2 y la parte de regazo debe quedar en la parte inferior de las caderas del niño, y • al sentarse en el asiento para niños, las orejas de su niño deben quedar por debajo de la parte superior de la almohadilla / apoyacabezas del asiento del vehí culo.
Requisitos para la ubicación del asiento del vehí culo LA COLOCACIÓN INCORRECTA DEL ASIENTO PARA NIÑOS AUMENTA EL RIESGO DE LESIONES GRAVES O LA MUERTE. Algunos asientos de su vehí culo podrán resultar inseguros para este asiento para niños. Algunos vehí culos no cuentan con asientos que se pueden usar de manera segura con el asiento para niños. Si no está seguro dónde colocar el asiento en su vehí culo, consulte el manual del propietario de su vehí culo o llame a Graco Children's Products Inc.
Requisitos para los cinturones de seguridad del vehí culo MUCHOS SISTEMAS DE CINTURONES DE SEGURIDAD NO SON SEGUROS PARA SU USO CON EL ASIENTO PARA NIÑOS. Preste mucha atención a estos sistemas; algunos de los cinturones de seguridad que NO son seguros para usar se parecen mucho a los que sí son seguros. Si no está seguro, consulte el manual del propietario de su vehí culo o llame a Graco Children's Products Inc. al 1-800-345-4109.
Sistemas INSEGUROS de cinturones de seguridad del vehí culo NO USE NINGUNO DE LOS SIGUIENTES SISTEMAS PARA SUJETAR EL ASIENTO DE SEGURIDAD. • NUNCA use un cinturón de regazo solamente.
Usar su asiento para niños de Graco NO SUJETAR CORRECTAMENTE A SU NIÑO Y EL ASIENTO PARA NIÑOS EN SU VEHÍ CULO AUMENTA EL RIESGO DE LESIONES GRAVES O LA MUERTE EN CASO DE UN GIRO BRUSCO, UNA PARADA REPENTINA O UN ACCIDENTE. Use solamente el sistema de cinturones de regazo y hombro del vehí culo al sujetar al niño en este asiento para niños 1 . 1 2 NUNCA use un cinturón de regazo solamente para sujetar a su niño 2 .
Los cinturones del 3 vehí culo DEBEN quedar planos encima del niño y NO DEBEN quedar torcidos. NO use el cinturón de los hombros suelto debajo del brazo del niño 3 . 4 NO coloque el cinturón del vehí culo por encima de los apoyabrazos 4 . Debe pasar por debajo de los apoyabrazos. Asegúrese que el cinturón de seguridad del vehí culo NO está doblado.
La parte de regazo del cinturón de regazo / hombro DEBE quedar bien ajustada en la parte inferior de las caderas, tocando los muslos. 5 NO permita que el niño se deslice hacia abajo en el asiento para niños 5 . Si el niño no mantiene la posición correcta del cinturón de seguridad del vehí culo, NO use este asiento para niños. Use otro sistema de seguridad infantil. 6 El apoyacabezas del asiento del vehí culo no debe interferir con el apoyacabezas del asiento para niños.
Posiciones del asiento para niños Su asiento para niños tiene dos posiciones como se indica. 2 Reclinado El respaldo del asiento para niños DEBE caber ajustadamente contra el respaldo del asiento del vehí culo como se indica en 3 en la primera o segunda posición. 3 NO USE el asiento para niños más allá de la posición reclinada 2 .
Sujetar a su niño en el vehí culo 1. Coloque el asiento para niños firmemente contra el respaldo de un asiento del vehí culo orientado hacia delante solamente con un cinturón de regazo / hombro 1 . 2. Siente a su niño en el asiento para niños con su espalda plana contra el respaldo del asiento para niños.
3. Pase el cinturón de hombro por el soporte del cinturón de hombro como se indica en 2 , NO como se indica en 3 . Abroche la hebilla y jale el cinturón de hombro hacia arriba para ajustarlo.
4. Para asegurar que 4 obtiene la altura correcta para apoyar la cabeza, la parte de abajo del apoyacabeza DEBE estar parejo con la parte de arriba de los hombros del niño como se indica en 4 y el cinturón de hombro debe estar 5 colocado en la zona roja como se indica en 5 . El cinturon de regazo DEBE pasar debajo del apoyabrazos y queda en la parte inferior de las caderas del niño.
5. Si el cinturón pasa a través del cuello, la cabeza o la cara del niño 6 , vuelva a ajustar la altura del apoyacabezas. Cumpla las instrucciones en la página 30, “Ajustar el apoyacabezas”.
Ajustar el apoyacabezas ANTES de ajustar la altura del apoyacabezas, incline a su niño un poco hacia delante. Apriete el botón rojo de ajuste en la parte superior del asiento y jale el apoyacabezas hacia arriba hasta que encaje en una de las 6 posiciones de altura. Para bajarlo, apriete el botón rojo de ajuste y empújelo hacia abajo. VERIFIQUE que quede bien encajado en una de las 6 posiciones de altura, jalando el apoyacabezas.
Desmontar el respaldo (en ciertos modelos) para usarlo como asiento para niños sin respaldo Para usar la asiento para niños sin respaldo: Desmonte el respaldo como se indica. Los ganchos en forma de "U" en el fondo del respaldo están entrelazados con las barras de la base. Desmonte el respaldo de la base.
Sujetar a su niño en el vehí culo con el clip de colocación del cinturón de hombro El cinturón de hombro DEBE pasar por encima de los hombros del niño en la zona roja como se indica. Si el cinturón de hombro queda fuera de esta zona, se DEBE usar el clip de colocación del cinturón de hombro. Para conectar el clip al asiento para niños: 1. Inserte el extremo con el bucle de la correa alrededor de la barra vertical en la parte trasera del asiento como se indica en 1 .
2. Pase el clip y la correa por el extremo con el bucle como se indica en 2 y jale la correa hacia arriba 3 . NOTA: El extremo libre de la correa debe quedar orientado hacia la parte delantera del asiento.
3. Deslice el cinturón de hombro del vehí culo en el clip como se indica en 4 y jale la correa hacia abajo para ajustar el clip contra el hombro del niño. El cinturon de regazo DEBE pasar debajo del apoyabrazos y queda en la parte inferior de las caderas del niño. El cinturoñ NO DEBE estar doblado.
Plano trasero del niño sentado en el asiento 5 Clip de colocación del cinturón de hombro 4. Para advertencias sobre las posiciones del cinturón de seguridad del vehí culo, vea las páginas 22 a 24, "Usar su asiento para niños de Graco".
Información adicional Uso en aviones Este asiento de seguridad no está certificado para su utilización en aviones, ya que éstos no disponen de cinturones de hombros. Apoyavasos Los apoyavasos se incluyen en ambos costados del asiento.
Almacenaje de la hoja de instrucciones Se puede guardar su hoja de instrucciones en el fondo del asiento como se indica.
Para quitar la funda del asiento 1. Quite los bucles elásticos y los ganchos del asiento, como se indica 1 . 1 En algunos modelos, hay un clip de plástico 2 en la parte delantera de la almohadilla del asiento que hay que quitar antes del lavado. 2 2. Lave la funda en agua frí a en el ciclo delicado y déjela secar al aire. NO USE CLORO. 3. Para volver a colocar la funda, siga las instrucciones anteriores en orden inverso.
Cojines para el cuerpo (en ciertos modelos) Algunos modelos incluyen cojines para el cuerpo. Coloque los cojines para el cuerpo tal como indica la figura. NO UTILICE otros cojines que no sean los provistos por Graco.
Repuestos Para comprar piezas o accesorios o para obtener información sobre la garantí a en los Estados Unidos, por favor comuní quese con nosotros en: www.gracobaby.