Manzel MHH Modular Divider Valves ® Modular, Series-Progressive, Divider Valve Delivers Positive Oil Lubrication for Gas Engines, Compressors and Similar Equipment at Pressures up to 6000 PSI and 7500 PSI Available Electronic Only MHH valve s are a dire ct replaceme nt fo MHP valve r s. * *MHP part numbers will automatically be superseded by the Graco GEDI order entry system.
MHH Modular Divider Valves MHH divider valves precisely proportion a volume of oil to satisfy the different requirements of every point in a lube system. They operate in sequential fashion to ensure that no point is missed. Series-Progressive design provides ready monitoring capability. MHH divider valves are available for use with petroleum or synthetic oils and at pressures up to 7500 PSI. The modular, stackable sub-plate design provides maximum application flexibility.
MHH Modular Divider Valves L10103 COMPONENTS Output Volume Key Size 1 6T – Description MHH (High Pressure fluoroelastomer 90 Durometer O-Rings) in3 cm3 Part No. Old Part No. Part No. Old Part No. .006 Twin 0.006 0.098 562667 106-000-085 562685 106-000-595 6S .006 Single 0.012 0.197 562661 106-000-025 562679 106-000-465 9T .009 Twin 0.009 0.149 562668 106-000-095 562686 106-000-605 9S .009 Single 0.018 0.295 562662 106-000-035 562680 106-000-475 12T .
MHH Modular Divider Valves CYCLE INDICATORS By sensing divider valve piston movement, lube volume can be accurately monitored and controlled. A variety of mechanical and electrical cycle indicators are available for this purpose. DIVIDER VALVE SECTIONS WITH ATTACHED CYCLE INDICATOR PIN L10103 Type Rating Part No. Old Part No. SPDT 20.0A @ 125, 250 VAC 0.50A @ 125 VDC 0.25A @ 250 VDC 563272 510-599-000 10.0A @ 125, 250 VAC 0.30A @ 125 VDC 0.
MHH Modular Divider Valves L10103 REED-TYPE PROXIMITY SWITCH (OPTIONAL) (2) 22 GA WIRES 48 IN. LONG 7/16-20 THRD. 1.125 DIA. SPECIFICATIONS Material Stainless Steel, Aluminum Switch Rating 1.2 Volt-Amperes; up to 115 VAC, 50 VDC Contacts Single Pole, Single Throw Ambient Temperature 0º F to 130º F (-18º C to 55º C) 3.687 1/2 IN. NPT FEMALE CONDUIT CONNECTION Operating Pressure 7,500 psi (max) Cycle Rate 60 cpm (max) Cycle Life Expectancy 10,000,000+ Cycles Part No.
MHH Modular Divider Valves L10103 Spring-Type Pressure Indicator with Memory PERFORMANCE INDICATORS Performance indicators respond to the increase in pressure which occurs when lube lines or lube points become blocked. When installed in indicator ports of working piston sections, they pinpoint blockage location. Some models relieve the excessive pressure, allowing the divider valve to continue to cycle. Some models do not relieve the excessive pressure, causing the divider valve to lock up.
MHH Modular Divider Valves L10103 DIMENSIONS Inches/(mm) TOP VIEW BLEED SCREWS (TORQUE TO 1-2 FT-LBS) 1.500 (38.1) Port Sizes .781 (19.9) SIDE VIEW 1.656 (42.06) 2.188 (55.56) Inlet Outlet 1/4-18 (F) NPSF 1/8-27 (F) NPSF 7/16-20 (F) SAE 7/16-20 (F) SAE Qty of Section 1.125 (28.58) LUBE INLET .406 (10.31) .734 (18.85) LUBE OUTLET (TYPICAL) "A" 3 3.578 (90.88) 4 4.500 (114.30) 5 5.422 (137.71) 6 6.344 (161.13) 7 7.266 (184.55) 8 8.188 (207.
ORDERING INFORMATION XXX – XXX – X – X – XX – X – XX SERIES OF DIVIDERS MHH - High Pressure Compressor to 7,500 psi (fluoroelastomer seals) INLET - OUTLET THREADS NPT - Inlet 1/4-18, Outlet 1/8-27 SAE - Inlet 7/16-20, Outlet 7/16-20 DIVIDER VALVE ACCESSORY OPTIONS (OMIT WHEN NOT REQUIRED) P - Assembly of Performance Indicators (in all working outlets **) C - Assembly of External Check Valves (in all working outlets **) B - Assembly of Performance Indicators & Check Valves (in all working outle
