Safety Instructions

Preset Mode
22 3A6673B
RESET
Restarts meter. After selecting RESET the
screen display goes blank. After
approximately 10 seconds the screens
shown in F
IG. 38- FIG. 40 display.
NOTE: The screen shown in F
IG. 38 allows
the user to upgrade for use with a Pulse FC
system. See Pulse FC Mode, page 28 for
instructions.
When the MAIN MENU Screen shown in F
IG.
40 displays, the meter is ready to use.
SET-UP SCREENS
The SET-UP Menu includes the following
options: UNIT OF MEASURE, BANNER,
CALIBRATE and “+++”.
A second SET-UP screen is accessed by
selecting the “+++”.
This screen includes options for
LANGUAGE, PRESET, FLIP DISPLAY and
LOCK SETTINGS. This screen also includes
a GO BACKoption to return to the user to the
UTILITY MENU screen.
1. Use the UP or DOWN ARROW button on
the keypad to select one of the SET-UP
options.
2. When the desired SET-UP option is
highlighted, press the center ENTER
button on the keypad
FIG. 38
FIG. 39
FIG. 40
FIG. 41