User's Manual

L12100
HAND-OPERATED PUMPS
DESCRIPTION
The multiple stroke, positive-displacement LubriSystem Hand
Pump (Figure 5) delivers 0.125 cubic inches (2.0 cm
3
) with each
stroke of the handle. The LubriSystem Hand Pump is available
with standard clear plastic reservoirs for either oil or grease.
Modular pump/reservoir design plus built-in features readily tailor
the LubriSystem Hand Pump to a wide range of applications.
The pump is sturdily built of aluminum and steel in a compact,
space-saving package. Even with an integrally mounted 20-pint or
20-pound capacity reservoir, it stands only 25.3 inches (644 mm)
high, is 7.25 inches (184 mm) wide and 11.03 inches (280 mm)
deep. It requires only 24.3 inches (617 mm) clearance from the
mounting surface for a full handle pull.
MOUNTING
Sturdy bracket, with two mounting holes, hold pump with
reservoir. The assembly components should be mounted in a
protected, centralized and readily accessible location. Pump must
be mounted in a vertical position only, with reservoir up. Use two
3/8 in or M10 machine screws at the mounting holes to ensure
secure placement.
Figure 5. Hand-Operated Pump
Page 9