User's Manual

HOW-TO-ORDER LUBRISYSTEM
ANALZING SYSTEM REQUIREMENTS
1. Determine individual bearing requirements. Graco
literature No. L20115 provides a procedure for
calculating the lubricant volume requirement for
individual lube points.
2. Analyze bearing locatoins and group those that can
conveniently fed from a single manifold. See ordering
instructions.
3. Analyze routine maintenance setup to determine
reservoir options and other accessories required.
ORDERING INSTRUCTIONS
4. Select the quantity of each injector size required.
5. Specify the manifolds required based on the groupings of
injectors.
6. *Order a Timer or Controller.
7. Select pump/reservoir confi guration and specify part
number using one of the following:
• Grease Reservoir - specify appropriate assembly
number.
• Oil Reservoir - specify appropriate assembly
number.
8. *Order Part No. 553315 (521-001-020), 115 VAC or
553332 (521-002-100), 24 VDC solenoid valve. (Install in
pump air inlet port.)
9. Specify appropriate pressure switch, in one is
required, using Bulletin No. L15521. Part No. 557828
(542-210-107) is usually used.
10. Specify Part No. 557559 (514-215-001) if a pressure
gauge is required (0-3000 psir). See Bulletin No. L15326.
11. Select fi ttings, accessories and mounting harware to
complete installation.
*Required only for air operated pumps.
FOR MORE INFORMATION
Literature No. L20102 - LubriSystem Design Guide. Guidelines
and information for LubriSystem component selection and
design calculation charts.
Literature No. L14521 - Solid-State Timer
Literature No. L14530 - TC-1000 Timer/Counter
Literature No. L14540 - LC-1000 Controller †
Literature No. L14750 - WMP III Maxi-Monitor †
Literature No. L14760 - Multi Purpose Controller †
Literature No. L15521 - Pressure Switch
Literature No. L20115 - Procedure for calculating the
lubricant volume requirement for various types of rotating and
moving lubrication points.
† Requires a system mounted pressure switch.
All written and visual data contained in this document are based on the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice.
©2012 Graco Inc. Form No. L12100 Rev. C 8/12 Printed in U.S.A. All other brand names or marks are used for identification purposes and are trademarks of their respective owners. All written and visual
data contained in this document are based on the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice.
Contact us today!
To receive product information or talk with a Graco representative,
call 800-533-9655 or visit us online at www.graco.com.