® Trabon MSP Modular Divider Valves Your key to maximum design flexibility with series-progressive reliability.
MSP Modular Divider Valves Match lubricant flow to the exact needs of each point.
MSP Modular Divider Valves Improve matchup of lube delivery and machine usage. Special Inlet Sections • Allow zoning of large systems served by single pump and reservoir • Choice of inlet port activation: electric or pneumatic • Simpler to install, add or remove points • Choice of SAE, NPSF, BSPP (ISO 1179) or metric (ISO 6149) connection These versatile inlets provide positive, series-progressive lubrication for extended lines and systems.
MSP Modular Divider Valves L10102 A wide variety of safeguards monitor and verify lube cycles • Track valve-piston action • Easily interfaced to system controller Cycle Indicators • Magnetic Visual Indicator: Six steel balls in a clear sleeve follow a magnet which moves with the cycling piston, providing a clear visual indication of lube cycles. Part number: with O-Ring, 563251 (509-932-522).
MSP Modular Divider Valves L10102 Choice of indicators offer automatic system protection and fault location. • Immediate response to blockages • Manual or automatic reset • Continues to serve unaffected points Performance Indicators These vital safeguards react to excess lube pressure when points or lines become blocked. Installed in indicator ports on the working piston sections, they quickly identify the affected lines.
MSP Modular Divider Valves L10102 Designed with over 100 years of experience in centralized lubrication.
MSP Modular Divider Valves Zero-Leak Inlet Shut-Off Valve L10102 Shunt Inlet Option “A” (See Page 6) Zero-Leak Electrical Specifications: Shunt/Shut-Off Electrical Specifications: 115 VAC, 0.22 A In-Rush, 0.14 A Holding 24 VDC, 28 W 115 VAC, 1.6 A In-Rush, 0.54 A Holding 24 VDC, 28 W Solenoid mounted on right side n.o. to divider, closed to bypass Solenoid mounted on left side n.c.
MSP Modular Divider Valves L10102 You can easily configure the system to the need. • Item 8 Custom performance from stock modules • Choice of Single or Twin outlets Specifying Guide - MSP Divider Valve 1 Item Part No. Old Part No.
MSP Modular Divider Valves NOTE: Part numbers shown on previous page are for standard plated steel with Buna-N Seals. Consult Graco for Viton Seals or stainless steel components. Valve sections with cycle pin are standard Right Hand; can be made Left Hand. Consult factory. Consult factory for components requiring thread connection series other than those listed. † End Section (SPP) is supplied with plugged 1/8-27 NPS manual lube fitting port. Order (412700-490) manual lube fitting separate.
MSP Modular Divider Valves How to Order Ordering Information L10102 Notes XXX - XXX - XX - X - X - XX - X - XX 1. Right/Left Hand determined when viewing front of divider valve assembly. (Divider valve assembly placed on flat surface with inlet at top.) 2. Valves are specified starting from inlet section. 3. When valve is crossported, its outlet is plugged and output is diverted to next valve away from inlet. 4. Last valve in divider assembly, farthest from inlet, cannot be crossported. 5.
MSP Modular Divider Valves L10102 Graco® has applied automatic lubrication technology to a world of needs including yours! Automated systems improve safety. Maintenance personnel do not have to lubricate dangerous machinery. Operators have less exposure to oil and lubricants on equipment and floor. Graco systems require minimum attention. Filling the reservoir and periodic inspections are the only routine maintenance required.
Your solution is at hand. Our years of engineering innovative lubrication technology, plus our worldwide network of more than 100 distributors means that the components you need are probably in stock right now. This inventory of proven components allows distributors and factory engineers to design a truly customized system using economical on-the-shelf parts. New or upgrade, Graco has the applied technology.
