User's Manual

Triton

™

3D Series

CIRCULATING PUMPS

Technical Specifications

Model Triton 3D 150 Triton 3D 350

Pump ratio 3:1 3:1

Maximum fluid outlet pressure 300 psi 260 psi

(21 bar, 2.1 MPa) (17.9 bar, 1.8 MPa)

Maximum air input pressure 100 psi 88 psi

(7 bar, 0.7 MPa) (6.1 bar, 0.6 MPa)

Fluid flow @ 20 cpm 0.8 gpm (3.2 lpm) 1.85 gpm (7.0 lpm)

Volume per cycle 5 oz (150 cc) 11 oz (350 cc)

Maximum recommended

continuous cycle rate 20 cpm 20 cpm

Air consumption @ 88 psi air @ 20 cpm 3 scfm (0.08 m3/min.) 10 scfm (0.28 m3/min.)

Sound pressure level

@100 psi air @ 20 cpm 67 dBA 67 dBA

Air motor inlet 1/4” npt(f) or 3/8” BSPP(f) 1/2” npt(f) or 1/2” BSPP(f)

Pump fluid inlet 3/4” npt(f) or M26 x 1.5(f) 1” npt(f) or 1” BSPP(f)

Pump fluid outlet 3/8” npt(f) or 3/8” BSPP(f) 1” npt(f) or 1” BSPP(f)

Weight 26 lb (12 kg) 64 lb (29 kg)

Instruction manual 311688 311689

PROVEN QUALITY. LEADING TECHNOLOGY.

PAGE 1
Triton 3D Series ™ C I R C U L AT I N G P U M P S Technical Specifications Model Triton 3D 150 Triton 3D 350 Pump ratio 3:1 3:1 Maximum fluid outlet pressure 300 psi (21 bar, 2.1 MPa) 260 psi (17.9 bar, 1.8 MPa) Maximum air input pressure 100 psi (7 bar, 0.7 MPa) 88 psi (6.1 bar, 0.6 MPa) Fluid flow @ 20 cpm 0.8 gpm (3.2 lpm) 1.85 gpm (7.
PAGE 2
Ordering Information 1. Select 3D 150 or 3D 350, based on flow requirements of the circulating system. Refer to TRITON 3D150 and 3D 350 pump performance charts. 2. Select npt or BSPP thread design based on circulating system pumping requirements. 3. Order pump part number.