User's Manual

ManualsBrandsGraco ManualsAutomatic Lubrication SystemsGraco Wheel Loader 333503B

The information contained in this document is only a recommendation for an automatic lubrication system and is not intended to

replace the installation and maintenance instructions provided by the original equipment manufacturer.

Mobile Lubrication Library

Wheel Loader

Suggested wheel loader automated lubrication system layout

Kit No.: 24R377, G3, USP, 31PT

Maximum System Working Pressure: 3000 psi (206 bar, 20.7 MPa)

Important Safety Information

Read all warnings and instructions in all

related manuals. Save all instructions.

Related Manuals

Manual No. Manual Title

3A0414 G3 Pump

3A0525 Pressure Relief Valve

3A0528 Remote Manual Run

3A0860 USP Valves

Fluid leaks from incorrectly installed or ruptured compo-

nents, and/or failure to verify the components are prop-

erly installed and tested, can result in serious injury

such as fluid spraying in the eyes or on skin and fluid

injection, or equipment damage.

To prevent injury or equipment damage, installation

must be done by a professional and tested prior to use.

Consult Parker literature for specific hose assembly

instructions. These instructions are available from your

Parker representative or at www.Parker.com/pdf.

333503B

Summary of content (6 pages)

PAGE 1
333503B Mobile Lubrication Library Wheel Loader Suggested wheel loader automated lubrication system layout Kit No.: 24R377, G3, USP, 31PT Maximum System Working Pressure: 3000 psi (206 bar, 20.7 MPa) Important Safety Information Read all warnings and instructions in all related manuals. Save all instructions. Related Manuals Manual No.
PAGE 2
Mobile Lubrication Library Suggested Lube Points USP Valves Left Side UNUSEABLE UNUSEABLE POINT 1 POINT 2 Right Side 5 4 1 6 3 2 POINT 3 POINT 4 POINT 5 POINT 6 Secondary #2 USP 6 UNUSEABLE UNUSEABLE POINT 13 PLUG POINT 14 POINT 15 POINT 16 POINT 17 Left Side 9 10 1 11 8 12 7 14 13 2 3 4 6 5 1516 27 1920 UNUSEABLE UNUSEABLE POINT 7 POINT 8 21 23 4 1 6 3 2 Secondary #3 USP 6 10 6 9 5 1 4 PLUG Secondary #2 PLUG Secondary #3 PLUG Secondary #5 2 3 28 30 22 25 31 26 2
PAGE 3
Mobile Lubrication Library LUBE POINT INFORMATION Lube Point USP Outlet 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 5 6 1 2 3 4 5 6 1 2 3 4 9 10 and 11 12 13 14 1 2 3 and 4 5 6 7 8 5 6 7 8 1 and 2 3 4 Bearing Description Bucket pin right Bucket pin right lower Bucket pin scissor upper right Bucket pin scissor lower right Cylinder head H beam right Bucket pin left Bucket pin left lower Bucket pin scissor upper left Bucket pin scissor lower left Cylinder foot H beam
PAGE 4
Mobile Lubrication Library 24R377: Recommended Kit Parts List Part Number 96G112 571036 571028 24E406 24E407 24E409 24E410 571033 24N007 24N008 24N009 16U586 556773 556763 555749 557393 556402 557349 16U587 15K783 127009 16U982 16U983 24F467 557944 127012 563178 127013 Description PUMP, G3-G-24MX-8L0L00-UDMVA1R2 (see manual 3A0414) KIT, accessory, cover KIT, accessory, pressure relief (see manual 3A0525) KIT, valve, USP, 6 outlet (see manual 3A0860) KIT, valve, USP, 8 outlet (see manual 3A0860) KIT, valve
PAGE 5
Mobile Lubrication Library Typical Pump Installation Manual Run Button Pressure Relief To Fuse/Power To Lube Points G3 Pump USP Valve
PAGE 6
Mobile Lubrication Library Graco Information For the latest information about Graco products, visit www.graco.com. TO PLACE AN ORDER, contact your Graco distributor or call to identify the nearest distributor. Phone: 612-623-6928 or Toll Free: 1-800-533-9655, Fax: 612-378-3590 All written and visual data contained in this document reflects the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice.