User guide

If handler must be moved, when the engine is not
workable, extreme care should be used because:
We recommend that the unit be pushed, not towed
and that the unit be attached firmly to the pushing
vehicle because the handler brakes are released.
MOVING HANDLER (Emergency Only)
With the engine not operating there will be NO
steering.
With the wheel hubs adjusted to permit move-
ment, ther will be NO brakes.
Place blocks on wheels to prevent movement.
On both rear axles, reverse the hub disengagement
caps.**
Loosen front hub cover bolts equally until cover
moves 3/16" to 1/4". This released the wet disc
brakes. ***
1.
2.
1.
2.
3.
If the handler is to be moved, do the following:
**In Disengaged **Out Engaged
** Back off 4 bolts
21