Parts Manual User Manual

3-3
BOOM
Third Boom Section
Starting Serial No. 0188002
Original Issue 1-90
Revised 9-14-95
Item Part No. Qty. Description Of Part
10 8820-1532 4 HEX HD CAPSCREW, 3/8-24X3/4,
GR5 (torque to 32-37 ft.lbs.)
8820-1534 AR HEX HD CAPSCREW, 3/8-24X1, GR5
(torque to 32-37 ft.lbs.)
11 8856-1109 8 FLATWASHER, 3/8
12 9103-3186 2 BEARING PAD
13 9103-1236 2 SPACER
14 9020-5870 AR SHIM
15 8820-1535 4 HEX HD CAPSCREW, 3/8-24X1-1/4,
GR5 (torque to 32-37 ft.lbs.)
16 9112-3019 2 BEARING PAD
17 8820-1065 1 HEX HD CAPSCREW, 1/2-13X1, GR5
Item Part No. Qty. Description Of Part
1 9112-6013 1 BOOM, THIRD SECTION
2 9114-6052 1 PIN WELDMENT
3 8855-1013 1 LOCKWASHER, 1/2"
4 8362-1283 1 WASHER
5 8820-1565 4 HEX HD CAPSCREW, 1/2-20X1-1/4,
GR5 (torque to 68-78 ft.lbs.)
8820-1566 AR HEX HD CAPSCREW, 1/2-20X1-1/2,
GR5 (torque to 68-78 ft.lbs.)
6 9002-7471 4 HARDENED FLATWASHER, 1/2
7 9108-3297 2 BEARING PAD
8 9108-1447 2 SPACER
9 9112-1081 AR SHIM
1). Add bearing pad shims & spacers as required to shim
boom to within 1/16" of a tight fit. Amounts of shims can vary at
each shim point. When a shim is used with a pad, a spacer must be
inserted between pad & shim. No pads shall sit directly on slotted
surface of shims.
2). The length of pad bolts depend on the amount of shims
used. Bolt cannot extend past chamfer on bearing.
NOTE:
KG
* Changed logo in upper left, added torque notes to items 5, 10 & 15, changed part numbers on
items 2, 3, 4 & 12, added item 17 & added note
*
*
*
*
*
*
*
*
*
*