User Manual

2. Install swing mast on boom head and connect

auxiliary hydraulic hoses to swing mast diversion

valve hoses. Also connect electrical cable at boom

head.

5. Inspect supporting surface at delivery point and

have it leveled if necessary.

6. Level handler before raising load.

7. If necessary, perform a “dry-run” (unloaded) of

delivery to determine best position for handler.

8. Use a signal man to assist in positioning the load if

necessary.

Observe all precautions and load capacity

limits (listed previously) when handling load

with swing mast.

3. Always lower carriage fully in mast and position

forks straight ahead before engaging load.

4. To travel with a load, keep forks straight ahead

and lower load to approximately one foot above

ground.

MULTI-FUNCTION AUXILIARY CONTROL LEVER

AUXILIARY CONTROLS

BUTTON

FUNCTIONS

1. MAST

2. SIDE

SHIFT

3. SWING

4. PANEL

SUPPORT

5. -----------

DECAL FOR PANEL HANDLER

If your unit is equipped with a multi-function

auxiliary control lever, it is not necessary to

depress button/s for single function attach-

ments.

LEVER

OPERATION

LEFT/DOWN

RIGHT/UP