Operation Manual

Coffee Grinder CM 95
© Gebr. Graef GmbH & Co. KG - 01
EN
9
➔ by clients in hotels, motels and other
residental type enviroments;
➔ bed and breakfast type enviroments.
■ If the supply cord is damaged, it must be
replaced by the manufacturer, its service or
similary qualied persons in order to avoid
a hazard.
■ Always pull the supply line from the electric
socket using the connector plug, not on
the supply cord.
■ Do not carry the unit by the supply cord.
■ Never transport the unit during operation.
■ The unit is not intended to be used with
an external timer or a separate telecontrol
system.
■ The unit is suitable solely for grinding cof-
fee beans.
■ Do not touch the plug with moist hands.
■ Do not use the packing material as a toy.
Danger of suffocation.
■ Follow the instructions regarding the re-
quirements for the place of installation and
on the unit’s electrical connection to pre-
vent personal harm and property damage.
■ Never put your hands, hair, clothing or oth-
er foreign bodies in the bean grinder while
the unit is in operation.
■ Do not try to regrind previously ground cof-
fee.
■ Switch off the appliance and disconnect
from supply before changing accessories or
approaching parts that move in use.
■ Let the unit cool off before cleaning.
■ Do not use any aggressive or abrasive clean-
ing agents and do not use any solvents.
■ Do not scratch off stubborn soiling with
hard objects.
■ Make sure that no liquid gets into the inte-
rior of the unit.
■ Do not put the unit in the dishwasher and
do not hold it under owing water.
First use
Unpacking
To unpack the unit, proceed as below:
■ Take the unit out of the carton.
■ Remove all pieces of the packing.
■ Remove any possibly extant labels on the
coffee grinder (do not remove the rating
plate).
Requirements for the installation
location
For safe and awless operation of the unit,
the place of location must meet these pre-
requisites:
■ The unit must be set up on a rm, at, lev-
el, non-slip and heat resistant base that has
sufcient load bearing capacity.
■ Select the place of location so that children
cannot reach the hot surfaces of the unit.
■ The unit is not intended for installation in a
wall or a built-in cupboard.
■ Do not set up the unit in a hot, wet or
moist environment.
■ The electric socket must be readily acces-
sible so that the power cord can be easily
unplugged.
Before the rst use
Clean all parts as described in “Cleaning”.
Grind setting
You can inuence the composition of the
coffee with various grind settings.
The wide range of grind settings lets you
make a precise adjustment.
Please observe the instructions below when
using the coffee grinder.
■ The ner the grind, the longer the grinding
process takes.
■ If you use a ne grind level, it is possible
that the coffee sticks together. During grin-
ding, knock on the coffee bean container
cover so that any possible coffee bean
clumps do not block the grinding.