Operation Manual
5
EN
placed by the manufacturer, its service or simi-
larlyqualiedpersonsinordertoavoidahazard.
• Always pull the supply cord from the electric
socket using the connector plug, not the supply
cord.
• Do not carry the unit by the supply cord.
• Never transport the unit during operation.
• Do not touch the plug with moist hands.
• Do not use the packing material as a toy. Dan-
ger of suffocation.
• Follow the instructions regarding the require-
ments for the place of installation and on the
unit’s electrical connection to prevent personal
harm and property damage.
• Switch off the appliance and disconnect from
supply before changing accessories or approach-
ing parts that move in use.
• Let the unit cool off before cleaning.
• Do not use any aggressive or abrasive cleaning
agents and do not use any solvents.
• Do not scratch off stubborn soiling with hard
objects.
• Make sure that no liquid gets into the interior
of the unit.
• Do not put the unit in the dishwasher and do
notholditunderowingwater.
Before the rst use
• Clean the unit as described in “Cleaning”.
• Heatuptheunitandafterwardsllinfreshdou-
gh.
• Becauseofhygienicreasons,disposetherst2
wafes.
Unpacking
To unpack the unit, proceed as below:
• Take the unit out of the carton.
• Remove all pieces of the packing.
• Remove any possibly extant labels on the unit
(do not remove the rating plate).
Requirements for the installation location
Forsafeandawlessoperationoftheunit,the
place of location must meet these prerequisites:
• The unit must be set up on a rm, at, level,
non-slipandheatresistantbasethathassuf-
cient load bearing capacity.