MSDS

©2011 NewLook International, Inc. ! All Rights Reserved
www.getNewLook.com ! 1525 South Gladiola Street, Suite 8, Salt Lake City, UT 84104 ! 877.763.9566 ! Office: 801.886.9495 ! Fax:
801.886.9497
Section 5
FIRE & EXPLOSION HAZARD DATA
Flash Point (Method Used): N/A
Auto ignition Temperature: N/A
Lower Explosive Limit: N/A
Upper Explosive Limit: N/A
Unusual Fire Explosion Hazards: Extinguish all nearby sources of ignition since Flammable Hydrogen Gas will be liberated from contact with
some metals (aluminium, magnesium, etc.) Caustics will react with many organic chemicals.
Extinguishing Media: Product is NOT flammable. Dry Chemical Foam
Special Fire Fighting Procedures: Evacuate hazard area of unprotected personnel. Wear proper protective clothing, including a NIOSH-
approved, positive pressure, self-contained breathing apparatus. Cool fire-exposed containers with water. In
case of large fires, also cool surrounding equipment and structures with water.
Section 6
ACCIDENTAL RELEASE MEASURES
Keep people away. Ventilate confined spaces. Open all windows and doors. Flush with water to a tank or an open, well-ventilated area. Recover by
pumping. Keep product out of sewers, watercourses, and soil by dyking or impounding. Absorb with sand, earth, or other suitable absorbent. Control
runoff and isolate discharge material for proper waste disposal method. Use non-leaking containers, seal tightly, and label properly. Dispose of in
accordance with applicable local, county, state, and federal regulations. Wear appropriate protective and respiratory equipment.
Section 7
HANDLING & STORAGE MEASURES
DO NOT FREEZE. Store in a cool, dry place with adequate ventilation. Keep containers closed. Obey all hazard warnings when containers are emptied.
Section 8
EXPOSURE CONTROL & PERSONAL PROTECTION
Engineering Controls: N/A
Other Protective Clothing Equipment: N/A
Personal Protective Equipment:
! Ventilation: Sufficient ventilation, in volume and pattern, should be provided to keep air contamination below current applicable OSHA
permissible exposure limit or ACGHI’s TLV limit.
! Wear safety goggles to protect eyes.
! Aprons and impervious, chemical-resistant gloves are needed to minimize contact with skin.
General Work Practices / Hygiene Considerations:
! Avoid prolonged or repeated contact with skin.
! Use good hygiene when handling this product. Cleanse skin after handling and before eating or drinking. Product is easily removed with
waterless hand cleaners followed by washing thoroughly with soap and water.
! Remove contaminated clothing and launder or dry-clean before use. Remove contaminated shoes and clean and dry before use.
Section 9
PHYSICAL & CHEMICAL PROPERTIES
Physical State: Liquid
Melting Point: N/A
Solubility in Water: Soluble/Complete
pH: N/A
Molecular Weight: N/A
Vapor Pressure (mmHg): N/A
Solids Percentage: N/A
VOC: N/A
Appearance / Color / Odor: Wet / Yellow
Boiling Point Range: 270°F - 575°F (97°C - 302°C)
How to Detect this Compound: Appearance
Specific Gravity (Water = 1): 1.150
Percent Volatiles: N/A
Vapor Density (Air = 1): Heavier than Air
Evaporation Rate (Butyl Acetate = 1): Slower than Ether