3-1/16" Ø13/16" (77mm) (20mm) 10" (254mm) (20mm) (118mm) 4-5/8" 4-5/8" (118mm) Ø1-15/16" 8-1/16" 8-1/16" (50mm) (204mm) IOG 2874.52 (50mm) . The , .1 2 L Ø1-15/16" (204mm) 2 L 7-1/2" (190mm) 9-7/8" Ø13/16" (77mm) (160mm) (230mm) GN-5890-LM49 6-5/16" (405mm) 9-1/16" 3-1/16" Model Modelo (250mm) GN-4890-LM49 15-15/16" Model Modelo , . .1 1 Rev.
A 1 B 3 12 15 16 26 25 12 4 4 8 11 9 11 6 5 10 7 10 2 13 14 13 21 14 22 21 23 22 24 23 17 24 19 17 18 19 20 18 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 A B TUBO FLEXIBLE DE TELEDUCHA TUBE CUERPO BODY AREADOR AERATOR REJILLA SLEEVE OBTURADOR HOLE PLUG CASQUILLO DEL CAŃO SPOUT SLEVVE CASQUILLO DESLIZANTE SLIDING RING CASQUILLO DESLIZANTE SLIDING RING EMPAQUETADURA DE ANILLO O-RING SEAL CABEZA CERÁMICA CERAMIC HEAD CHAPA SHROUD MANILLA LEVER BASE DE LA
FAUCET INSTALLATION INSTALACIÓN DE LA GRIFERÍA 1 4 17 17 18 19 18 9/16-24 UNEF 19 18 20 20 13 2 14 21 13 22 14 23 21 24 17 22 23 24 17 3 See fig. 3 ENGLISH Ver. fig. 3 1. Screw the stud bolt (21) into small hole. 2. Position base seals (22) in underside cavity of the faucet bases (13). Be sure seal is fully seated in groove. 3. From underneath the sink place rubber washer (22), metal washer (23) on the stud bolt (21), then screw on the mounting nut (24). Hand tighten only. 4.
2 AFTER INSTALLATION BEFORE USE DESPUES DE LA INSTALACIÓN Y ANTES DEL USO See figs. 1 ENGLISH ~ Ver. fig. 1 ESPANOL 1. Remove aerator insert (3) (use the special key (A) supllied) and 1. Retire el inserto del aereador (3) (use una llave especial (A)) anexa turn faucet handle to the full on mixed position. al juego) y gire el mango del grifo a la posición de mezclado 2. Turn on hot and cold water supply valves and flush water lines for 15 completo. seconds 1) . 2.
