Owner's manual

4. Monorail Installation
16 PNEG-1824 24' Dura-Lok Plank and Support Manual
Tie Strap Detail
1. Tie straps should be used when a tie bar cannot be used to connect rails together due to special
spacing of monorail. Tie strap should be connected to all three (3) rails using self-drilling screws.
(See Figure 4D.)
2. Tie straps are to be located in the same places as a tie bar would be used.
NOTE: Some tie straps will be used to support center well and intermediate well assembly.
(See Figure 5D on Page 23 and Figure 5E on Page 24.)
Figure 4D Strap Detail