User Manual

18 PNEG-529 Cor-Lok and Cut-Lok Flooring for Non-GSI Bin Diameter
8. Cut-Lok/Cor-Lok Floors for Non-GSI Bins
Cut-Lok/Cor-Lok Floors for Non-GSI Bins
High back flashing is included with the floor unless otherwise requested. If 17-1/4" grandstands are to be
used, low back flashing should be requested.
Alway start at the sidewall of the bin and work to the center of the bin.
* Plank will be centered at center of the bin.
19'-0" (18'-7") Diameter Bin
(“A” = 9'-4")
1 3'-6"
2 7'-2"
3 9'-6"
4 11'-1"
5 12' - 5-1/2"
6 13' - 7-1/2"
7 14' - 7-1/2"
8 15' - 5-1/2"
9 16'-2"
10 6' - 9-1/2"
11 17' - 3-1/2"
12 17' - 8-1/2"
13 18' - 0-1/2"
14 18' - 3-1/2"
15 18'-6"
16 18'-7"
22'-0" (21'-8") Diameter Bin
(“A” = 10'- 9-1/2")
1 4' - 2-1/2"
2 8'-0"
3 10' - 5-1/2"
4 12'-4"
5 13'-8"
6 15'-0"
7 16'-1"
8 17'-1"
9 17'-11"
10 18' - 7-1/2"
11 19'-3"
12 19'-10"
13 20' - 3-1/2"
14 20'-8"
15 21'-0"
16 21'-3"
17 21'-5"
18 21' - 6-1/2"
* 19 21' - 7-1/2"
25'-0" (24'-9") Diameter Bin
(“A” = 12'-3")
1 4'-11"
2 8'-9"
3 11'-4"
4 13' - 4-1/2"
5 14'-10"
6 16'-3"
7 17'-6"
8 18' - 6-1/2"
9 19'-6"
10 20'-4"
11 21'-1"
12 21'-9"
13 22'-4"
14 22'-10"
15 23'-3"
16 23' - 7-1/2"
17 23'-11"
18 24'-2"
19 24' - 4-1/2"
20 24'-6"
21 24'-7"