User Manual

8. Cut-Lok/Cor-Lok Floors for Non-GSI Bins
PNEG-529 Cor-Lok and Cut-Lok Flooring for Non-GSI Bin Diameter 19
Cut-Lok/Cor-Lok Floors for Non-GSI Bins (Continued)
High back flashing is included with the floor unless otherwise requested. If 17-1/4" grandstands are to be
used, low back flashing should be requested.
Alway start at the sidewall of the bin and work to the center of the bin.
* Plank will be centered at center of the bin.
28'-0" (27'-10") Diameter Bin
(“A” = 13'-5")
1 7' - 11-1/2"
2 11'-0"
3 13'-4"
4 15'-3"
5 16'-9"
6 18'-2"
7 19' - 4-1/2"
8 20'-6"
9 21'-6"
10 22' - 4-1/2"
11 23'-2"
12 23' - 10-1/2"
13 24'-6"
14 25'-1"
15 25'-7"
16 26'-0"
17 26'-5"
18 26'-9"
19 27'-0"
20 27'-3"
21 27'-5"
22 27' - 6-1/2"
23 27'-7"
31'-0" (30'-11") Diameter Bin
(“A” = 15' - 5-1/2")
1 2'-3"
2 8'-8"
3 11' - 9-1/2"
4 14'-3"
5 16'-3"
6 17'-10"
7 19'-9"
8 20'-8"
9 21' - 10-1/2"
10 22' - 11-1/2"
11 23'-11"
12 24'-9"
13 25'-7"
14 26'-4"
15 27'-0"
16 27'-7"
17 28'-1"
18 28'-7"
19 29'-0"
20 29' - 4-1/2"
21 29'-8"
22 29' - 11-1/2"
23 30'-2"
24 30'-4"
25 30'-6"
26 30'-7"
* 27 30' - 7-1/2"