Manual

2003 Top Dry Service School
8
3.00”
ROOF MOUNT PLATE
COMPRESSION COUPLER
DRYING CHAMBER HILIMIT ROTARY
SWITCH INSTALLATION
Assemble 1/4” shaft to rotary switch with 1/4”
coupler and rolled pins. Next Screw 1-1/4” pipe
coupler to bottom of rotary switch. Insert 1-1/4”
pip through adjustable roof mount weldment.
Leave 1-1/4” pipe sticking out the top of the
weldment 3” as shown in Diagram. Install paddle
to 1/4” shaft assembly with coupler and rolled pins.
Switch assembly is now ready to mount to roof.