200 Series Portable Dryer Parts Manual PNEG-1342
1200 Series Parts Manual Table of Contents 1200 SERIES DRYER SPECIFICATIONS......................................................................4 MAIN STRUCTURE ASSEMBLY...................................................................................5 FRAME ASSEMBLY..............................................................................................................................................................5 FRAME, LOWER BASKET, AND METERING ROLLS...........................................
1200 Series Parts Manual 1200 Series Specifications MODEL NUMBER 1214 Grain Columns 1216 1218 1220 1222 1226 14” x 14’ LONG 14” x 16’ LONG 14” x 18’ LONG 14” x 20’ LONG 14” x 22’ LONG 14” x 26’ LONG 8”, 5HP 8”, 5HP 8”, 5HP 8”, 7.5HP 8”, 7.5HP 8”, 10HP 8” x 10” TUBE 5HP 8” x 10” TUBE 5HP 8” x 10” TUBE 5HP 8” x 10” TUBE 7.5HP 8” x 10” TUBE 7.
Right side **NOTE: The parts pointed out on this page are listed on page 7. -52 5 3 1a 5 3 4a 5 The fan heater end of the dryer is considered by GSI as the front end of the dryer (the foreground of this photograph is the front end. Right and left sides are labeled above). 1 4 5 3 Frame Assembly (view from fan/heater end with hitch weldment removed).
1200 Series Parts Manual Frame Right front corner of frame. **NOTE: The right front corner is shown in the photo. For left front corner all parts are the same except for the Hitch Bracket (use 1a for the left side), and the Frame Rail (use 4a for the left side). 3 1 1a 2 4 4a Left rear corner of frame. 3 5 2 4a -6- 4 **NOTE: The left rear corner is shown in the photo. For right rear corner all parts are the same except for the Frame Rail (use 4 for the right side).
1200 Series Parts Manual Frame Center cross ties.
Note the hole pattern of the plenum closure door angles. This will distinguish between L.H. and R.H. 7 2 1 6 9 5 10 4 6 3 8 11 5 9 4 6 Dryer frame and lower basket assembly (view from the front end of the dryer looking down the left side). 1200 Series Parts Manual Frame, Auger Trough, & Hopper Bulkheads **NOTE: The parts pointed out on this page are listed on page 11.
**NOTE: The parts pointed out on this page are listed on page 11. -9- 4 13 9 3 12 6 14 15 12 3 11a Dryer frame and lower basket assembly (view from the rear end of the dryer looking up the right side). 6 12 5 12 Center hanger bearing support and cross channel seal plate. 9 6 3 6 20 19 Discharge bearing plate. 4 Wooden meter roll support bearing. The meter roll sections are spliced together with a meter roll splice shaft (part no.
1200 Series Parts Manual Meter Rolls and Their Placement in the Dryer Metering Rolls and their placement in the dryer. NOTE: Item 22 at the rear of dryer is a front section meter roll that is used as a rear section on 16 and 20 foot dryers only. 22 Meter Roll Bearing See pg. 11 Items 16, 17, 18 24 23 23 Meter Roll Bearing See pg. 11 Items 16, 17, 18 23 23 13 Meter Roll Bearing See pg. 11 Items 16, 17, 18 19 19 22 22 This end is the front (fan/heater) end of the dryer.
1200 Series Parts Manual Meter Rolls and Their Placement in the Dryer ITEM NUMBER PART NUMBER 1 2 3 4 5 6 7 8 9 10 11 11 11 11 11 11 11A 11A 11A 11A 11A 11A 12 13 14 15 16 17 18 19 20 21 22 23 24 D01-1136Y D01-1136X D01-0109 D01-0004 D01-0005 D01-0007 D01-0011 D01-0012 D01-0008 D01-1374 D21-0011 D01-0538 D31-0044 D61-0002 D101-0002 D71-0001 D21-0010 D01-0537 D31-0043 D61-0001 D101-0001 D71-0002 D01-0048 D01-1512 D01-1291 D01-1290 D02-0028 D31-0148 D02-0061 D01-0177 D01-1511 D31-0120 D31-0031 D31-0030 D3
00 Series Parts Manual Inside (Plenum) Screens, Plenum Closure Doors Plenum screens and bulkheads (view from front end). 3 2 1 4 3 5 5 6 16 7 8 10 7 11 13 15 14 18 19 9 12 10 This photograph was taken before the front plenum end panel and outer screens where installed in order to get a good view of the inside screens and bulkheads. 20 20a 21 22 Plenum closure door. There are two different plenum closure doors.
1200 Series Parts Manual Meter Roll Upper Shield Assembly Close up of of meter roll upper shield assembly.
1200 Series Parts Manual Outer Screens, & Meter Roll Access Door Outer screens (view from front end). 2 * 4 * 3 * 3a 3 3 3a 2 4 5 1 13 14 6 *Note: Item 3 is pointing to the top edge angle gusset. There are two types of gusset on the dryer. The photo above will help distinguish the difference between the two. The arrows are pointing to a tab on the gusset that makes them different (tabs are “bent” up in photo). Item 3a is used in two places only; 1.) front right of dryer 2.
1200 Series Parts Manual Plenum Divider Plenum divider. Plenum divider clean-out door. 9 10 9 7 8 The photo above and on page 16 was taken before plenum end panels where installed.
1200 Series Parts Manual Clean Out Doors Front and rear handle mechanisms (rear shown in photo). *Note: Items 9, 10, & 11 together create the clean out door assembly. There are three different clean out door assemblies that are used on GSI Network dryers: 1.) 3 column clean out door assy. (D51-0077). Item 8a on the part no. listing (pg 17). 1 2.) 4 column clean out door assy. (D11-0032). Item 8b on the part no. listing (pg 17). 3 2 13 3.) 5 column clean out door assy. (D01-0349).
1200 Series Parts Manual Clean Out Doors Center handle mechanisms (this handle mechanism stradles the center cross channels). 3a 14 1a 14 4 3a 2 5 ITEM NUMBER PART NUMBER 1 1a 2 3 3a 4 5 6 7 8a 9 10 11 8b 9 10 11 D01-0264 D31-0162 D01-0296 D01-0261 D01-0293 D01-0294 S-4378 S-248 S-7241 D51-0077 D21-0005 D21-0012 D01-0308 D11-0032 D31-0021 D31-0130 D01-0308 PIVOT ROD 25.188" PIVOT ROD 49.
1200 Series Parts Manual Front & Rear Plenum End Panels, & Upper & Lower Rear Access Doors Rear end panels. Front end panels & support arms. 3 3 2 1 4 1 1 5 3 6 27 9 Aspirator end cap. 6 7 8 1 25 26 Upper rear access door. Lower rear access door.
1200 Series Parts Manual Front & Rear Plenum End Panels, & Upper & Lower Rear Access Doors Lower rear access door (inside). Upper rear access door (inside).
1200 Series Parts Manual Ladder Assemblies Fan/Heater ladder assembly.
1200 Series Parts Manual Ladder Assemblies Front and rear ladder assembly.
1200 Series Parts Manual Bottom Auger Bottom Auger (view from center of dryer to Bottom Auger (view from center of dryer to the forward end). the rear end). 1 2 2 3 2 4 Bottom Auger center bearing and support. 5 7 Bottom Auger rear bearing.
1200 Series Parts Manual Bottom Auger Rear Discharge Box. Auger bearing.
1200 Series Parts Manual Top Auger With Wet Bin Assembly 2 1 1 Top Auger with wet bin (switch paddle end). 3 6 4 7 5 8 1 3 11 9 10 12 8 5 9 13 14 14a Top Auger (fill end).
1200 Series Parts Manual Top Auger With Wet Bin Assembly Top Auger bearing support. Top Auger bearing support (inside view).
1200 Series Parts Manual Bottom Auger Drive Bottom Auger drive components 1 9 10 2 8 3 7 4 6 5 11 11 Bottom Auger motor and motor mount. 12 Forward drive tension adjustment. 13 5 13 Rear drive tension adjustment.
1200 Series Parts Manual Bottom Auger Drive Bottom auger and metering roll drive guard.
1200 Series Parts Manual Top Auger Drive 1 6 Belt guard upper mount. 1 4 2 3 5 Top Auger drive components. 12 13 Top Auger belt guard cover.
1200 Series Parts Manual Top Auger Drive 7 8 9 10 11 Top Auger motor and motor mount. ITEM NUMBER 1 2 3 4 5 5 6 7 * 8 8 * 8 8 8 9 10 11 12 13 PART NUMBER DESCRIPTION D01-0453 TOP AUGER BELTGARD BODY D52-0001 SHEAVE 2GR 16" GRIPBELT D32-0019 BUSHING Q1-1 1/2" SPLIT TAPER D01-0464 BELT-V BX97 2818-2 SHEAVE 2GR 3.35Dx1 1/8" BORE D62-0003 SHEAVE 2GR 4.25Dx1 3/8" D01-0155 MOUNTING BRACKET-BELT GD SPCR D01-0424 DRYER TOP HAND HOLD 500-1 MOTOR 5HP 1PH 1800RPM 500-3 MOTOR 5HP 3PH 1800RPM 712-1 MOTOR 7.
1200 Series Parts Manual Metering Roll Drive SCR Motor/Reduction drive and motor mount assembly. 8 1 7 2 3 4 5 6 Meter roll drive train components.
1200 Series Parts Manual Metering Roll Drive Front meter roll bearing. 18 Rear meter roll bearing.
1200 Series Parts Manual Fan Heater Housing Assembly Fan Heater housing assembly. 26” & 28” burner support and collector cup. 13 1 14 2 3 14a 13a 36”-42” burner support and collector cup. 4 5 12 7 8 9 4 10 4 11 6 5 4 6 Heater access panel assembly (left photo is outside and right photo is inside of the door). Items 4 through 8 make up the heater access panel assembly (part no. CD-APA6065).
1200 Series Parts Manual Fan Heater Housing Assembly BOTTOM FANS ITEM NUMBER PART NUMBER 1 1 1 1 1 2 2 2 3 3 3 3 4-8 4 5 6 7 8 9 10 11 12 13 13 13a 13a 13a 14 14 14a 14a 14a D01-0659 D01-0535 D01-1470 D01-1471 D01-1472 D01-0651 D01-0529 D01-1452 D01-0528 D01-1480 D01-1479 D01-1451 CD-APA6065 TFH-2046 HF-6062 HF-6063 HF-7379 HF-7380 DC-1224 DC-1227 DC-1225 DC-113 HF-986 HF-983 D01-1484 D01-1485 TF-1217 HF-978 HF-7092 D01-1482 D01-1483 TF-1216 DESCRIPTION WRAPPER, 26" FAN HEATER WRAPPER, 28" FAN HEATER
1200 Series Parts Manual Fan Motor, Motor Mount, & Fan Blade Fan motor and motor mount.
1200 Series Parts Manual Air Mixer Assemblies Air mixer assemblies (36” air mixer shown in photo). 1 1a 2 ITEM NUMBER PART NUMBER 1-2 1 1a 2 1-2 1 1a 2 1-2 1&1a 2 1-2 1&1a 2 1-2 1&1a 2 D01-0969 D01-0968 D01-0967 CD-0228 D01-0955 D01-0951 D01-0950 CD-0228 CD-0113 D01-1303 CD-0083 CD-0117 D01-1218 CD-0083 CD-0118 CD-0192 CD-0083 DESCRIPTION AIR MIXER ASSEMBLY, 26" AIRMIXER CAN, 26" x 15" LONG AIRMIXER CAN, 26" x 8" SHORT SMALL DIA.
1200 Series Parts Manual Flame Probe, Ignitor, and Burner Assemblies Ignitor and flame probe assemblies. Flame probe Ignitor 8 7 1 6 2 3 5 4 26” Fan heater burner assembly. 28” Fan heater burner assembly.
1200 Series Parts Manual Flame Probe, Ignitor, and Burner Assemblies 42” Fan heater burner assembly. 36” & 40” Fan heater burner assembly.
1200 Series Parts Manual LP Pipe Train Assemblies 26” & 28” Fan Heater LP pipe train assembly.
1200 Series Parts Manual LP Pipe Train Assemblies F 32 7 34 6 ITEM NUMBER PHOTO (A,B,C,D,E) PART NUMBER 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 20a 21 22 23 24 25 26 27 28 29 30 31 32 33 34 NOT SHOWN A A A,C A A A,F A,F B B B,E B B B,D B,D B B,C B C B B E B,C C,D C C C D D D E E F F F F D67-0005 HH-7013 HH-3854 THH-4058 D07-0019 HH-4847 TFC-0095 TFC-0081 HH-2984 D03-0241 D18-0002 HH-1254 HH-1255 033-1016-6 THH-4121 S-7259 CD-0179 CD-0044 THH-4154 THH-4149 THH-4149 HH-6502 THH-4128 HH-1
1200 Series Parts Manual LP Pipe Train Assemblies 36” Fan Heater LP pipe train assembly.
1200 Series Parts Manual LP Pipe Train Assemblies 29 30 26 27 31 32 33 28 8 30 27 E ITEM NUMBER PHOTO (A,B,C,D,E) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 A,D A,D A,D A,D A,D A,D A,D A,E A A,D A,B A B B,D B B B C,D C,D C,D D D D D D E E E PART NUMBER D07-0029 CD-0044 S-7259 THH-4121 D67-0021 HH-7013 D67-0005 HH-3854 HF-7225 D18-0002 THH-4128 TFC-0020 033-1016-6 HH-1255 HH-1932 TFC-0032 TFC-0030 D03-0241 THH-4120 D08-0018 HH-1254 THH-4154 CD-017
1200 Series Parts Manual LP Pipe Train Assemblies 40” & 42” Fan Heater (with motors that are 20 hp or less) LP pipe train assembly.
1200 Series Parts Manual LP Pipe Train Assemblies 31 32 28 29 33 34 35 30 8 32 29 E ITEM NUMBER PHOTO (A,B,C,D,E) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 19a 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 a,d a,d a,d a,d a,d a,d a,d a,e a a a,b a b b,d b b b c,d c,d d c,d d d d d d d d e e e PART NUMBER D07-0029 CD-0044 S-7259 THH-4121 D67-0021 HH-7013 D67-0005 HH-3854 HF-7225 D18-0002 THH-4128 TFC-0020 033-1016-6 HH-1255 HH-1932 TFC-0032 TFC-0030 D01-1778 THH-4115 THH-4120 THH-4151
1200 Series Parts Manual NG Pipe Train Assemblies 26” & 28” Natural gas pipe train assembly.
1200 Series Parts Manual NG Pipe Train Assemblies 26" FAN HEATER NATURAL GAS PIPE TRAIN ITEM NUMBER 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 PART NUMBER TF-1239 D62-0005 D08-0018 THH-4120 D08-0022 THH-4121 THH-4124 THH-4154 TFC-0033 D58-0003 THH-4164 D08-0017 D08-0003 D58-0002 D01-1503 D01-1504 D58-0004 D07-0028 DESCRIPTION ANGLED PIPE TRAIN BRACKET CLAMP 3/4" NIPPLE, 3/4 x 4" SCH 40 ELBOW, 3/4"-90 SCH 40 GUAGE PRESSURE 0-15# NIPPLE, 3/4" CLOSE SCH 40 TEE 3/4" x 3/4" x 3/4" SCH 40 TEE 3/4" x 3/4" x 1
1200 Series Parts Manual NG Pipe Train Assemblies 36”, 40”, & 42” Natural gas pipe train assembly.
1200 Series Parts Manual NG Pipe Train Assemblies D 11 19 4 5 18 12 17 12 ITEM PHOTO NUMBER (A,B,C,D) 1 A,B,C 1a A,B,C 1a A,B,C 2 A,B,C 3 A,B,C 4 A,C,D 5 A,C,D 6 B,C 7 B,C 8 B,C 9 B,C 10 B,C 11 B,D 12 B,C,D 13 B 14 B,C 15 C 16 C 17 D 18 D 19 D PART NUMBER D08-0011 GT3-0553 D08-0007 D08-0013 D08-0001 S-6643 TF-1239 D03-0445 D08-0009 D08-0022 THH-4001 TF-1536 HH-7038 THH-4117 D38-0001 D03-0446 TFC-0093 THH-4151 THH-4115 TFC-0031 D68-0020 DESCRIPTION ELBOW 1 1/2"-90 SCH 40 RDCR, HEX 1 1/2" x 3/4" (FO
1200 Series Parts Manual Fan Heater Orifices LIQUID PROPANE ORIFICES FAN HEATER ORIFICE SIZE PART NUMBER ITEM NO. 26"12hp .2188" HF-7087 1 HF-7587 2 PIPE FOR 26" FAN HEATER ORIFICE 28"12hp .25" THF-3241 3 36"12hp .2813" THF-3242 3 36"15hp .3281" CD-0150 3 40"15hp .3438" THF-3058 3 42"20hp .375" THF-3247 3 42"25hp .3906" THF-3249 3 NATURAL GAS ORIFICES FAN HEATER ORIFICE SIZE PART NUMBER ITEM NO. 26"12hp .3125" HF-7099 1 HF-7587 2 PIPE FOR 26" FAN HEATER ORIFICE 28"12hp .375" THF-3140 3 36"12hp .
1200 Series Parts Manual LP Supply Line Liquid propane fuel supply line. 1 Supply line mounting brackets. 2 3 14 15 4 13 8 5 4 6 16 12 4 11 10 7 8 9 8 1 ITEM No. PART No.
1200 Series Parts Manual NG Supply Line Supply line mounting brackets. 1 1 3 4 2 5 8 7 17 18 6 9 10 16 11 Natural gas fuel supply line. 14 1 2 12 13 15 CD-SL-N14 SUPPLY LINE IS USED ON DRYERS 14 ft - 18 ft. CD-SL-N15 SUPPLY LINE IS USED ON DRYERS 20 ft - 26 ft.
1200 Series Parts Manual Upper Juntion Box, Top Auger Motor Conduit, & Operator Light Top auger motor conduit. Upper junction box. 1 4 3 5 Operator light. 6 Fill switch assembly (installed). 7 2 9 12 10 1 9 11 2 15 11 10 1 2 8 Fill switch assembly (opened). 13 14 Items 9 - 14 are components of the mercury switch box assembly (fill switch assembly) part no. D01-0192. ITEM No.
1200 Series Parts Manual Right & Left Grain and Plenum High Limits Left grain and plenum high limit Right grain high limit thermothermostat enclosures. stat enclosures. Upper plenum high limit 8 12 7 Left grain high limit 11 4 Conduit from right grain high limit is run to right lower junction box. Lower plenum high limit Upper plenum high limit thermostat. Grain temperature thermister. There are 2 thermisters in each (right & left) grain high limit thermostat assemblies.
1200 Series Parts Manual Right & Left Grain and Plenum High Limits Upper plenum high limit thermostat conduit. 13 14 15 16 12 Lower plenum high limit thermostat conduit. ITEM No. 1 2 2 3 4 5 6 6 7 8 9 10 11 12 13 13 14 15 16 DESCRIPTION HIGH LIMIT MOUNTING BRACKET plenum-thermostat 10' 300deg (for 14' dryers only) PLENUM-THERMOSTAT 24' 300DEG (for dryers that are 16' and longer) ENCLOSURE 4x4x2.
1200 Series Parts Manual Lower Junction Box, Meter Roll Motor Conduit, Rear Discharge Conduit Lower junction box (right). Lower junction box (left). 5 6 7 3 7 4 8 6 9 5 2 2 1 Conduit to Meter Roll Motor (see photo below) 1 2 3 4 1 Meter roll motor conduit connection. 8 10 Conduit to Meter Roll Speed Sensor & Rear Discharge Switch (see photos below & on next page) 1 11 Meter roll speed sensor and rear discharge switch conduit.
1200 Series Parts Manual Lower Junction Box, Meter Roll Motor Conduit, Rear Discharge Conduit Meter roll speed sensor. 16 Rear discharge switch conduit at rear left gusset. 17 18 19 2 1 11 1 7 Rear discharge switch (open to show mercury switch). 7 20 8 24 9 23 21 ITEM No.
1200 Series Parts Manual Air Switch Assembly Air switch assembly (part # D01-0672). Air switch assembly (internal parts). 3 7 9 2 8 4 5 6 1 Upper air switch assembly (installed). Lower air switch assembly (installed). 10 10 1-9 11 12 11 11 10 1-9 ITEM No. PART No. 1-9 1 2 3 4 5 6 7 8 9 D01-0672 D01-0671 D01-0670 DC-1103 D03-0177 HF-7227 HF-7228 HF-7226 HF-7229 D03-0167 ITEM No.
1200 Series Parts Manual Network Control Box 3 1 4 2 5 17 19a 18 Conduit from fan control box (same for upper and lower network box) Conduit from air switch assembly (same for upper and lower network box) 2 18 18 19b Conduit from: 1.)upper network box (lower network box) 2.)upper plenum high limit (upper network box) Conduit from fan heater pipe train (same for upper and lower network box) 6 7 Conduit from: 1.)lower junction box (lower network box) 2.
1200 Series Parts Manual Fan Heater Electrical Box Fan Heater control box and electrical components. 1 4 5 2 13 12 3 14 6 ITEM NUMBER PART NUMBER 1 2 2 2 3 4 4 5 6 F-942 CD-0005 CD-0065 CD-0193 FH-4429-1 CD-0202 CD-0203 HH-7048 HH-7016 11 26" & 28" FAN 36" FAN HEATERS HEATERS DESCRIPTION ELECT.
1200 Series Parts Manual Fan Heater Electrical Box ITEM NUMBER DESCRIPTION 7 8 9 10 11 12 13 14 TERMINAL-BLOCK ENTRELEC 4MM TERMINAL-BLANK END PROTECTOR TERMINAL-ENTRELEC END STOP TERMINAL-ENTRELEC GRND BLOCK CONTACTOR OVERLOAD LUG GROUND,#TA-2 GRP-TRANSFORMER 2POLE IGNITION 10-12 HP FAN MOTORS (2612, 2812, 3612 FAN HEATERS) 220V 1Ph 208V 3Ph 220V 3Ph 440V 3Ph 575V 3Ph D01-0531 D01-0531 D01-0531 D01-0531 D01-0531 D01-0532 D01-0532 D01-0532 D01-0532 D01-0532 D01-0533 D01-0533 D01-0533 D01-0533 D01-0533
1200 Series Parts Manual Control Box Control Panel Network control panel (front). 10 1 2 14 13 3 12 4 11 10 5 ITEM NUMBER 1 2 3 4 5 6 7 8 9 10 11 12 13 14 6 7 8 DESCRIPTION DECAL, NETWORK DRYER 2 FAN SWITCH 2 POS. SELECTOR AMBER SWITCH 2 POS. SELECTOR GREEN SWITCH 3 POS. SELECTOR WHITE SWITCH 2 POS. SELECTOR CLEAR 3 POS. SELECTOR SWITCH YELLOW SWITCH 3 POS. SELECTOR BLUE SWITCH 3 POS. SELECTOR RED KNOB, AUGAT #PK-70B-1/4 LATCH, SOUTHCO SLOTTED SWITCH STOP BLOCK (RED) SWITCH START N.O.
1200 Series Parts Manual Control Box Control Panel (Inside) Network control panel (rear). 1 7 2 3 6 1 Detailed view of a two position switch. Detailed view of a single position switch. 4 4 5 5 4 ITEM NUMBER 1 2 3 4 5 6 7 DESCRIPTION LATCH, SOUTHCO SLOTTED NETWORK DRYER DISPLAY BOARD COMPUTER MOUNTING PLATE BLOCK, CONTACT N/O BLOCK, LIGHT 12/24/120V LAMPS SCR POTENTIOMETER 10K NETWORK SWITCH PANEL - 61 - CIRCUIT MISC. CONTROL MISC. CONTROL CONTROL CONTROL MISC.
1200 Series Parts Manual Lower Control Box Back Panel Lower control box back panel. 1 2 3 Emergency stop switch (outside). 10 11 Emergency stop switch (inside).
1200 Series Parts Manual Upper Control Box Upper control box power distrbution panel.
DESCRIPTION POWER BOX BOCK PANEL OVERLOAD OVERLOAD OVERLOAD OVERLOAD CONTACTOR CONTACTOR CONTACTOR CONTACTOR TERMINAL-BLOCK ENTRELEC 4MM TERMINAL-BLANK END PROTECTOR TERMINAL-ENTRELEC END STOP TERMINAL-ENTRELEC GRND BLOCK RELAY, 3PDT 120V RH3B-U IDEC RELAY BASE, 3PDT TRANSFORMER TERMINAL GROUND BAR NETWORK DRYER CONTROL BOARD MOUNT PLATE NETWORK DRYER CONTROL BOARD NETWORK DRYER CONTROL BOARD COVER PLATE BREAKER 6 AMP 1 POLE 110VAC BREAKER 10 AMP 2 POLE DELAYED BREAKER 3 AMP 2 POLE DELAYED SCR CONTACTOR 15
DESCRIPTION POWER BOX BOCK PANEL OVERLOAD OVERLOAD OVERLOAD OVERLOAD CONTACTOR CONTACTOR CONTACTOR CONTACTOR TERMINAL-BLOCK ENTRELEC 4MM TERMINAL-BLANK END PROTECTOR TERMINAL-ENTRELEC END STOP TERMINAL-ENTRELEC GRND BLOCK RELAY, 3PDT 120V RH3B-U IDEC RELAY BASE, 3PDT TRANSFORMER TERMINAL GROUND BAR NETWORK DRYER CONTROL BOARD MOUNT PLATE NETWORK DRYER CONTROL BOARD NETWORK DRYER CONTROL BOARD COVER PLATE BREAKER 6 AMP 1 POLE 110VAC BREAKER 10 AMP 2 POLE DELAYED BREAKER 3 AMP 2 POLE DELAYED SCR CONTACTOR 15
DESCRIPTION POWER BOX BOCK PANEL OVERLOAD OVERLOAD OVERLOAD OVERLOAD CONTACTOR CONTACTOR CONTACTOR CONTACTOR TERMINAL-BLOCK ENTRELEC 4MM TERMINAL-BLANK END PROTECTOR TERMINAL-ENTRELEC END STOP TERMINAL-ENTRELEC GRND BLOCK RELAY, 3PDT 120V RH3B-U IDEC RELAY BASE, 3PDT TRANSFORMER TERMINAL GROUND BAR NETWORK DRYER CONTROL BOARD MOUNT PLATE NETWORK DRYER CONTROL BOARD NETWORK DRYER CONTROL BOARD COVER PLATE BREAKER 6 AMP 1 POLE 110VAC BREAKER 10 AMP 2 POLE DELAYED BREAKER 3 AMP 2 POLE DELAYED SCR CONTACTOR 15
DESCRIPTION POWER BOX BOCK PANEL OVERLOAD OVERLOAD OVERLOAD OVERLOAD CONTACTOR CONTACTOR CONTACTOR CONTACTOR TERMINAL-BLOCK ENTRELEC 4MM TERMINAL-BLANK END PROTECTOR TERMINAL-ENTRELEC END STOP TERMINAL-ENTRELEC GRND BLOCK RELAY, 3PDT 120V RH3B-U IDEC RELAY BASE, 3PDT TRANSFORMER TERMINAL GROUND BAR NETWORK DRYER CONTROL BOARD MOUNT PLATE NETWORK DRYER CONTROL BOARD NETWORK DRYER CONTROL BOARD COVER PLATE BREAKER 6 AMP 1 POLE 110VAC BREAKER 10 AMP 2 POLE DELAYED BREAKER 3 AMP 2 POLE DELAYED SCR CONTACTOR 15
DESCRIPTION POWER BOX BOCK PANEL OVERLOAD OVERLOAD OVERLOAD OVERLOAD CONTACTOR CONTACTOR CONTACTOR CONTACTOR TERMINAL-BLOCK ENTRELEC 4MM TERMINAL-BLANK END PROTECTOR TERMINAL-ENTRELEC END STOP TERMINAL-ENTRELEC GRND BLOCK RELAY, 3PDT 120V RH3B-U IDEC RELAY BASE, 3PDT TRANSFORMER TERMINAL GROUND BAR NETWORK DRYER CONTROL BOARD MOUNT PLATE NETWORK DRYER CONTROL BOARD NETWORK DRYER CONTROL BOARD COVER PLATE BREAKER 6 AMP 1 POLE 110VAC BREAKER 10 AMP 2 POLE DELAYED BREAKER 3 AMP 2 POLE DELAYED SCR CONTACTOR 15
DESCRIPTION POWER BOX BOCK PANEL OVERLOAD OVERLOAD OVERLOAD OVERLOAD CONTACTOR CONTACTOR CONTACTOR CONTACTOR TERMINAL-BLOCK ENTRELEC 4MM TERMINAL-BLANK END PROTECTOR TERMINAL-ENTRELEC END STOP TERMINAL-ENTRELEC GRND BLOCK RELAY, 3PDT 120V RH3B-U IDEC RELAY BASE, 3PDT TRANSFORMER TERMINAL GROUND BAR NETWORK DRYER CONTROL BOARD MOUNT PLATE NETWORK DRYER CONTROL BOARD NETWORK DRYER CONTROL BOARD COVER PLATE BREAKER 6 AMP 1 POLE 110VAC BREAKER 10 AMP 2 POLE DELAYED BREAKER 3 AMP 2 POLE DELAYED SCR CONTACTOR 15
NOTES
NOTES
1004 E. Illinois St.
