2300 Series Portable Dryer Parts Manual PNEG-1376
CONTENTS Specifications.....................................................................................................................................................4 BOTTOM MODULE Frame.................................................................................................................................................................5 Frame, Auger Trough, Hopper Bulkheads.........................................................................................................
SPECIFICATIONS MODEL NUMBER 2314 2318 2320 2322 2326 14” x 14’ long 14” x 18’ long 14” x 20’ long 14” x 22’ long 14” x 26’ long 8”, 5 hp 8”, 5 hp 8”, 7.5 hp 8”, 7.5 hp 8”, 10 hp 8” x 10” Tube 5 hp 8” x 10” Tube 5 hp 8” x 10” Tube 7.5 hp 8” x 10” Tube 7.
Right side **NOTE: The parts pointed out on this page are listed on page 7. -52 5 3 1a 5 3 4a 5 The fan heater end of the dryer is considered by GSI as the front end of the dryer (the foreground of this photograph is the front end. Right and left sides are labeled above). 1 4 5 3 Frame Assembly (view from fan/heater end with hitch weldment removed).
2300 Series Parts Manual Bottom Module Frame Right front corner of frame. **NOTE: The right front corner is shown in the photo. For left front corner all parts are the same except for the Hitch Bracket (use 1a for the left side), and the Frame Rail (use 4a for the left side). 3 1 1a 2 4 4a Left rear corner of frame. 3 5 2 4a -6- 4 **NOTE: The left rear corner is shown in the photo. For right rear corner all parts are the same except for the Frame Rail (use 4 for the right side).
2300 Series Parts Manual Bottom Module Frame Center cross ties.
Note the hole pattern of the plenum closure door angles. This will distinguish between L.H. and R.H. 7 2 1 6 9 5 10 4 6 3 8 11 5 9 4 6 Dryer frame and lower basket assembly (view from the front end of the dryer looking down the left side). 2300 Series Parts Manual Bottom Module Frame / Auger Trough / Hopper Bulkheads **NOTE: The parts pointed out on this page are listed on page 11.
**NOTE: The parts pointed out on this page are listed on page 11. -9- 4 13 9 3 12 6 14 15 12 3 11a Dryer frame and lower basket assembly (view from the rear end of the dryer looking up the right side). 6 12 5 12 Center hanger bearing support and cross channel seal plate. 9 6 3 6 20 19 Discharge bearing plate. 4 Wooden meter roll support bearing. The meter roll sections are spliced together with a meter roll splice shaft (part no.
2300 Series Parts Manual Bottom Module Meter Rolls and Their Placement in the Dryer Metering Rolls and their placement in the dryer. NOTE: Item 22 at the rear of dryer is a front section meter roll that is used as a rear section on 16 and 20 foot dryers only. 22 Meter Roll Bearing See pg. 11 Items 16, 17, 18 24 23 23 Meter Roll Bearing See pg. 11 Items 16, 17, 18 23 23 13 Meter Roll Bearing See pg. 11 Items 16, 17, 18 19 19 22 22 This end is the front (fan/heater) end of the dryer.
2300 Series Parts Manual Bottom Module Meter Rolls and Their Placement in the Dryer ITEM NUMBER PART NUMBER 1 2 3 4 5 6 7 8 9 10 11 11 11 11 11 11A 11A 11A 11A 11A 12 13 14 15 16 17 18 19 20 21 22 23 24 D01-1136Y D01-1136X D01-0109 D01-0004 D01-0005 D01-0007 D01-0011 D01-0012 D01-0008 D01-1374 D21-0011 D31-0044 D61-0002 D101-0002 D71-0001 D21-0010 D31-0043 D61-0001 D101-0001 D71-0002 D01-0048 D01-1512 D01-1291 D01-1290 D02-0028 D31-0148 D02-0061 D01-0177 D01-1511 D31-0120 D31-0031 D31-0030 D31-0029 DES
2300 Series Parts Manual Bottom Module Inside (Plenum) Screens / Plenum Closure Doors Plenum screens and bulkheads (view from front end). 3 2 4 3 1 23 5 5 6 7 8 10 7 11 23 13 15 14 10 12 16 9 This photograph was taken before the front plenum end panel and outer screens where installed in order to get a good view of the inside screens and bulkheads. 20 20a 21 22 Plenum closure door. There are two different plenum closure doors.
2300 Series Parts Manual Bottom Module Meter Roll Upper Shield Assembly Close up of of meter roll upper shield assembly.
2300 Series Parts Manual Bottom Module Outside Screens / Meter Roll Access Door 4 * *Note: Item 4 is pointing to the top edge angle gusset. There are two types of gusset on the dryer. The photo right will help distinguish the difference between the two. The arrows are pointing to a tab on the gusset that makes them different (tabs are “bent” up in photo). Item 4a is used in two places only; 1.) front right of dryer 2.) rear left of dryer, all others are item 4. 1 2 4 4a Meter roll access door.
2300 Series Parts Manual Bottom Module Plenum Divider Right rear plenum divider section with clean-out door. 1 3 2 2 Plenum divider floor sections. Plenum divider support channels.
2300 Series Parts Manual Bottom Module Clean Out Doors Front and rear handle mechanisms (rear shown in photo). *Note: Items 9, 10, & 11 together create the clean out door assembly. There are three different clean out door assemblies that are used on GSI Network dryers: 1.) 3 column clean out door assy. (D51-0077). Item 8a on the part no. listing (pg 17). 1 2.) 4 column clean out door assy. (D11-0032). Item 8b on the part no. listing (pg 17). 3 2 13 3.) 5 column clean out door assy. (D01-0349).
2300 Series Parts Manual Bottom Module Clean Out Doors Center handle mechanisms (this handle mechanism stradles the center cross channels).
2300 Series Parts Manual Bottom Module Module Support Pads / Stiffener Attach Angles Module support pad. 8 7 See page 19 for column locations for the upper module base pads and stiffener attach angles. 6 5 Top edge angle splice.
2300 Series Parts Manual Bottom Module Module Support Pads / Stiffener Attach Angles ITEM NUMBER PART NUMBER 1 1 1 2 3 3 4 5 6 7 8 D21-0003 D31-0004 D01-0168 D31-0003 D31-0004 D01-0168 D01-0872 D61-0021 D61-0022 D61-0012 D61-0013 DESCRIPTION TOP EDGE ANGLE 71.875" TOP EDGE ANGLE 95.875" TOP EDGE ANGLE 119.875" TOP EDGE ANGLE SPLICE TOP EDGE ANGLE 95.875" TOP EDGE ANGLE 119.
2300 Series Parts Manual Bottom Module Front Ladder Assembly 4 1 5 2 3 5 6 7 ITEM NUMBER PART NUMBER 1-3 1 2 3 4 5 5 5 6 7 D01-1220 D61-0096 D61-0094 D61-0095 D51-0022 F-7060-Y CD-0543-Y CD-0545-Y D51-0021 D31-0082 DESCRIPTION LADDER ASSY.
2300 Series Parts Manual Bottom Module Rear Ladder Assembly 4 1 2 4 3 ITEM NUMBER PART NUMBER 1-3 1 2 3 4 D04-0388 D61-0096 D61-0092 D61-0093 D61-0097 LADDER LADDER LADDER LADDER LADDER DESCRIPTION ASSEMBLY RUNG SIDE RAIL-LH SIDE RAIL-RH MOUNTING BRACKET, REAR - 21 - 2314 2318 2320 2322 2326 1 1 1 1 1 10/ASSEMBLY 1/ASSEMBLY 1/ASSEMBLY 3 3 3 3 3
2300 Series Parts Manual Bottom Module Front End Panels / Fan Support / grill guards 1 5 2 4 5 3 3 ITEM NUMBER PART NUMBER DESCRIPTION 1 D61-0023 TOP ANGLE, FAN SUPPORT PANEL 2 CD-0576 GRILL GUARD: CD-28 BLACK 2 CD-0544 GRILL GUARD: 36" BLACK 2 CD-0547 GRILL GUARD: 40&42" BLACK 3 D31-0307 COLUMN END PANEL 4 D01-0593 FRONT FAN SUPPORT 2-28" 4 D61-0041 FRONT FAN SUPPORT 2-36" 4 D71-0008 FRONT FAN SUPPORT 2-40" 5 F-7060-Y VENTURI: 28" YEL/OCHRE 5 CD-0543-Y VENTURI: 36" OCHRE 5 CD-0545-Y VENTURI: 40" OC
00 Series Parts Manual Bottom Module Rear End Panels / Rear Access Door 3 Rear access door (outside). 8 5 6 7 8 9 Rear access door (inside). 10 11 5 12 6 1 10 13 11 4 3 ITEM NUMBER 1 2 3 4 5-13 5 6 7 8 9 10 11 12 13 PART NUMBER DESCRIPTION D31-0307 COLUMN END PANEL D01-1800-Y REAR END PANEL 50/50 29" DOORS D01-0044 TOP ANGLE BRACKET FRONT & REAR D01-1510 ASPIRATOR END CAP RDA-29-Y REAR DOOR ASSEMBLY 29"SQ OCHR D01-1783-Y ASSIST HANDLE 29" SQ.
2300 Series Parts Manual Bottom Module Bottom Auger Bottom Auger (view from center of dryer to Bottom Auger (view from center of dryer to the forward end). the rear end). 1 2 2 3 2 4 Bottom Auger center bearing and support. 5 7 Bottom Auger rear bearing.
2300 Series Parts Manual Bottom Module Bottom Auger Rear Discharge Box. Auger bearing.
2300 Series Parts Manual Bottom Module Bottom Auger Drive Bottom Auger drive components 1 9 10 2 8 3 7 4 6 5 11 11 Bottom Auger motor and motor mount. 12 Forward drive tension adjustment. 13 5 13 Rear drive tension adjustment.
2300 Series Parts Manual Bottom Module Bottom Auger Drive Bottom auger and metering roll drive guard.
2300 Series Parts Manual Bottom Module Metering Roll Drive SCR Motor/Reduction drive and motor mount assembly. 8 1 7 2 3 4 5 6 Meter roll drive train components.
2300 Series Parts Manual Bottom Module Metering Roll Drive Front meter roll bearing. 18 Rear meter roll bearing.
2300 Series Parts Manual Top Module Frame / Lower Basket 3 1 6 7 6 5 7 6 2 6 4 7 6 7 6 Front view of the frame components. **NOTE: The parts pointed out on this page are listed on page 33.
2300 Series Parts Manual Top Module Frame / Lower Basket 1 6 8 10 9 5 2 6 4 7 9 6 7 8 6 Front view of the frame and lower basket components. **NOTE: The parts pointed out on this page are listed on page 33.
2300 Series Parts Manual Top Module Frame / Lower Basket Rear view of the frame and lower basket components.
2300 Series Parts Manual Top Module Frame / Lower Basket 8 8 9 9 13 13 7 7 14 14 10 5 ITEM NUMBER PART NUMBER 1 2 3 3 3 3 3 4 4 4 4 4 5 6 7 8 9 10 11 12 13 14 D01-0012 D01-0011 D21-0011 D31-0044 D61-0002 D101-0002 D71-0001 D21-0010 D31-0043 D61-0001 D101-0001 D71-0002 D61-0048 D01-0007 D01-0005 D01-0004 D01-0101 D61-0077 D61-0017 D61-0103P D61-0073 D61-0019 DESCRIPTION HITCH BRACKET RIGHT HITCH BRACKET LEFT FRAME RAIL, 14' RIGHT FRAME RAIL, 18' RIGHT FRAME RAIL, 20' RIGHT FRAME RAIL, 22' RIG
2300 Series Parts Manual Top Module Inside (Plenum) Screens / Outside Screens * 4 1 *Note: Item 4 is pointing to the top edge angle gusset. There are two types of gusset on the dryer. The photo right will help distinguish the difference between the two. The arrows are pointing to a tab on the gusset that makes them different (tabs are “bent” up in photo). Item 4a is used in two places only; 1.) front right of dryer 2.) rear left of dryer, all others are item 4.
2300 Series Parts Manual Top Module Stiffener Attach Angles / Crane Brackets 1 2 1 3 See page 19 for the locations of the stiffener attach angle.
2300 Series Parts Manual Top Module Front End Panels / Fan Support / Grill Guard and Venturi Fan support extension attach angles. 14 1 6 2 5a 5 1 2 3 4 Service platform attach bracket.
2300 Series Parts Manual Top Module Rear End Panels / Rear Access Door / Front and Rear Ladders Rear access door (outside). 1 10 7 2 2 8 9 4 10 11 Rear access door (inside). 12 13 3 7 14 5 8 6 12 15 13 NOTE: The Ladder assembly shown above is the same for the front and rear on upper modules.
2300 Series Parts Manual Top Module Top Auger With Wet Bin Assembly 2 1 1 Top Auger with wet bin (switch paddle end). 3 6 4 7 5 8 1 3 11 9 10 12 8 5 9 13 14 14a Top Auger (fill end).
2300 Series Parts Manual Top Module Top Auger With Wet Bin Assembly Top Auger bearing support. Top Auger bearing support (inside view).
2300 Series Parts Manual Top Module Top Auger Drive 1 6 Belt guard upper mount. 1 4 2 3 5 Top Auger drive components. 12 13 Top Auger belt guard cover.
2300 Series Parts Manual Top Module Top Auger Drive 7 8 9 10 11 Top Auger motor and motor mount. ITEM NUMBER PART NUMBER 1 2 3 4 5 5 6 7 * 8 8 8 8 9 10 11 12 13 D01-0453 D52-0001 D32-0019 D01-0464 2818-2 D62-0003 D01-0155 D01-0424 500-1 500-3 712-3 1000-3 D01-0173 D01-0465 D01-0170 D01-0452-Y DC-971 DESCRIPTION TOP AUGER BELTGARD BODY SHEAVE 2GR 16" GRIPBELT BUSHING Q1-1 1/2" SPLIT TAPER BELT-V BX97 SHEAVE 2GR 3.35Dx1 1/8" BORE SHEAVE 2GR 4.
2300 Series Parts Manual Fan Heaters Fan Heater Housing Assembly Fan Heater housing assembly. 26” & 28” burner support and collector cup. 13 1 14 2 3 14a 13a 36”-42” burner support and collector cup. 4 5 12 7 8 9 4 10 4 11 6 5 4 6 Heater access panel assembly (left photo is outside and right photo is inside of the door). Items 4 through 8 make up the heater access panel assembly (part no. CD-APA6065).
2300 Series Parts Manual Fan Heaters Fan Heater Housing Assembly ITEM NUMBER 1 1 1 1 2 2 3 3 3 3 4-8 4 5 6 7 8 9 10 11 12 13 13a 13a 13a 14 14a 14a 14a PART NUMBER DESCRIPTION D01-0535 WRAPPER, 28" FAN HEATER D01-1470 WRAPPER, 36" FAN HEATER D01-1471 WRAPPER, 40" FAN HEATER D01-1472 WRAPPER, 42" FAN HEATER D01-0529 STRAIGHTENING VANE, 28" F/H D01-1452 STRAIGHTENING VANE, 36-42" F/H D01-0528 INNER CAN, 28" F/H D01-1480 INNER CAN, 36" F/H D01-1479 INNER CAN, 40" F/H D01-1451 INNER CAN, 42" F/H CD-APA6065 HE
2300 Series Parts Manual Fan Heaters Fan Motor / Motor Mount / Fan Blade Fan motor and motor mount. 1 2 FAN HEATER; (Dia., HP) ITEM NUBER 1 28" 12Hp 36" 12Hp 36" 15Hp 40" 15Hp 40" 25Hp 42" 20Hp 42" 25Hp 42" 30Hp 42" 40Hp Fan blade and bushing.
2300 Series Parts Manual Fan Heaters Air Mixer Assemblies Air mixer assemblies (36” air mixer shown in photo). 1 1a 2 ITEM NUMBER PART NUMBER 1-2 1 1a 2 1-2 1&1a 2 1-2 1&1a 2 1-2 1&1a 2 D01-0955 D01-0951 D01-0950 CD-0228 CD-0113 D01-1303 CD-0083 CD-0117 D01-1218 CD-0083 CD-0118 CD-0192 CD-0083 DESCRIPTION AIR MIXER ASSEMBLY, 28" AIRMIXER CAN, 28" x 15" LONG AIRMIXER CAN, 28" x 8" SHORT SMALL DIA.
2300 Series Parts Manual Fan Heaters Flame Probe / Ignitor / Burner Assemblies Ignitor and flame probe assemblies. Flame probe Ignitor 8 7 1 6 2 3 5 4 28” Fan heater burner assembly.
2300 Series Parts Manual Fan Heaters Flame Probe / Ignitor / Burner Assemblies 42” Fan heater burner assembly. 36” & 40” Fan heater burner assembly.
2300 Series Parts Manual Fan Heaters LP Pipe Train Assemblies 28” Fan Heater LP pipe train assembly.
2300 Series Parts Manual Fan Heaters LP Pipe Train Assemblies F 32 7 34 6 31 31 33 7 32 ITEM NUMBER PHOTO (A,B,C,D,E) PART NUMBER 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 NOT SHOWN A A A,C A A A,F A,F B B B,E B B B,D B,D B B,C B C B B B,C C,D C C C D D D E E F F F F D67-0005 HH-7013 HH-3854 THH-4058 D07-0019 HH-4847 TFC-0095 TFC-0081 HH-2984 D03-0241 D18-0002 HH-1254 HH-1255 033-1016-6 THH-4121 S-7259 CD-0179 CD-0044 THH-4154 THH-4149 HH-65
2300 Series Parts Manual Fan Heaters LP Pipe Train Assemblies 36” Fan Heater LP pipe train assembly.
2300 Series Parts Manual Fan Heaters LP Pipe Train Assemblies 29 30 26 27 32 31 33 28 8 30 27 E ITEM NUMBER PHOTO (A,B,C,D,E) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 A,D A,D A,D A,D A,D A,D A,D A,E A A,D A,B A B B,D B B B C,D C,D C,D D D D D D E E E PART NUMBER D07-0029 CD-0044 S-7259 THH-4121 D67-0021 HH-7013 D67-0005 HH-3854 HF-7225 D18-0002 THH-4128 TFC-0020 033-1016-6 HH-1255 HH-1932 TFC-0032 TFC-0030 D03-0241 THH-4120 D08-0018 HH-1254 THH
2300 Series Parts Manual Fan Heaters LP Pipe Train Assemblies 40” & 42” Fan Heater LP pipe train assembly.
2300 Series Parts Manual Fan Heaters LP Pipe Train Assemblies 31 32 28 29 33 34 35 30 8 32 29 E ITEM NUMBER PHOTO (A,B,C,D,E) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 19a 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 a,d a,d a,d a,d a,d a,d a,d a,e a a a,b a b b,d b b b c,d c,d d c,d d d d d d d d e e e PART NUMBER D07-0029 CD-0044 S-7259 THH-4121 D67-0021 HH-7013 D67-0005 HH-3854 HF-7225 D18-0002 THH-4128 TFC-0020 033-1016-6 HH-1255 HH-1932 TFC-0032 TFC-0030 D01-1778 THH-4115 THH-41
2300 Series Parts Manual Fan Heaters NG Pipe Train Assemblies 36”, 40”, & 42” Natural gas pipe train assembly.
2300 Series Parts Manual Fan Heaters NG Pipe Train Assemblies D 11 19 4 5 18 12 17 12 ITEM PHOTO NUMBER (A,B,C,D) 1 A,B,C 1a A,B,C 1a A,B,C 2 A,B,C 3 A,B,C 4 A,C,D 5 A,C,D 6 B,C 7 B,C 8 B,C 9 B,C 10 B,C 11 B,D 12 B,C,D 13 B 14 B,C 15 C 16 C 17 D 18 D 19 D PART NUMBER D08-0011 GT3-0553 D08-0007 D08-0013 D08-0001 S-6643 TF-1239 D03-0445 D08-0009 D08-0022 THH-4001 TF-1536 HH-7038 THH-4117 D38-0001 D03-0446 TFC-0093 THH-4151 THH-4115 TFC-0031 D68-0020 DESCRIPTION ELBOW 1 1/2"-90 SCH 40 RDCR, HEX 1 1/2
2300 Series Parts Manual Fan Heaters NG Pipe Train Assemblies 28” Natural gas pipe train assembly.
2300 Series Parts Manual Fan Heaters Fan Heater Orifices 28" FAN HEATER NATURAL GAS PIPE TRAIN ITEM NUMBER 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 PART NUMBER TF-1239 D62-0005 D08-0018 THH-4120 D08-0022 THH-4121 THH-4124 THH-4154 TFC-0033 D58-0003 THH-4164 D08-0017 D08-0003 D58-0002 D01-1503 D01-1504 D58-0004 DESCRIPTION ANGLED PIPE TRAIN BRACKET CLAMP 3/4" NIPPLE, 3/4 x 4" SCH 40 ELBOW, 3/4"-90 SCH 40 GUAGE PRESSURE 0-15# NIPPLE, 3/4" CLOSE SCH 40 TEE 3/4" x 3/4" x 3/4" SCH 40 TEE 3/4" x 3/4" x 1/4" SC
2300 Series Parts Manual Fan Heaters LP Supply Line (Bottom Module) 8 6 1 5 7 1 1 7 2 5 6 2 4 3 9 3 12 10 - 58 - 11 11 15 16 13 17 14
2300 Series Parts Manual Fan Heaters LP Supply Line (Top Module) 4 5 6 1 7 9 8 1 3 NOTE: Hoses that connect the supply line to the fan heater pipe train are shown on pages 48-53. 2 ITEM No.
2300 Series Parts Manual Fan Heaters NG Supply Line (Bottom Module) 5 7 8 6 1 1 1 5 6 7 2 2 4 3 3 9 10 - 60 - 11 12 13
2300 Series Parts Manual Fan Heaters NG Supply Line (top Module) 9 6 8 1 4 5 7 1 3 NOTE: Not Shown are the hoses that connect the supply line to the fan heater pipe train: Part No. D68-0007 for 28” fan heaters and D68-0019 for 36”, 40” and 42” fan heaters. 2 ITEM No.
2300 Series Parts Manual Electrical (Bot. Mod.) Plenum High limit Thermostats / Right Grain High Limit Thermostat Right grain high limit. Right grain and plenum high limits. 1 2 3 4 5 Upper plenum high limit. 1 6 3 3 6 1 5 4 9 7 8 8 Lower plenum high limit. Plenum high limit conduit (plenum pipe).
2300 Series Parts Manual Electrical (Bot. Mod.) Left Grain High Limit Thermostat / Operator Light Operator light. Left grain high limit. 5 17 4 3 18 2 1 5 4 4 5 16 5 ITEM No. 1 2 2 3 4 5 6 6 7 8 9 10 11 12 13 14 15 16 17 18 19 4 19 8 DESCRIPTION ENCLOSURE 4x4x2.
2300 Series Parts Manual Electrical (Bot. Mod.) Lower Junction Box / Meter Roll Motor Conduit / Rear Discharge Conduit Lower junction box (right). Lower junction box (left). 5 6 7 3 7 4 8 6 9 5 2 2 1 Conduit to Meter Roll Motor (see photo below) 1 2 3 4 1 Meter roll motor conduit connection. 8 10 Conduit to Meter Roll Speed Sensor & Rear Discharge Switch (see photos below & on next page) 1 11 Meter roll speed sensor and rear discharge switch conduit.
2300 Series Parts Manual Electrical (Bot. Mod.) Lower Junction Box / Meter Roll Motor Conduit / Rear Discharge Conduit Meter roll speed sensor. 16 Rear discharge switch conduit at rear left gusset. 17 18 19 2 1 11 1 7 Rear discharge switch (open to show mercury switch). 7 20 8 24 9 23 21 ITEM No.
2300 Series Parts Manual Electrical (Bot. Mod.) Air Switch Assembly Air switch assembly (part # D01-0672). Air switch assembly (internal parts). 3 7 9 2 8 4 5 6 1 Upper air switch assembly (installed). Lower air switch assembly (installed). 10 10 1-9 11 12 11 11 10 1-9 ITEM No. PART No. 1-9 1 2 3 4 5 6 7 8 9 D01-0672 D01-0671 D01-0670 DC-1103 D03-0177 HF-7227 HF-7228 HF-7226 HF-7229 D03-0167 ITEM No.
2300 Series Parts Manual Electrical (Bot. Mod.) Network Control Box 3 1 4 2 5 2 6 7 8 9 16 15 14 13 12 11 ITEM No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 DESCRIPTION NETWOK BOX MOUNTING CHANNEL ENCLOSURE, 12" x 10 " x 5.
2300 Series Parts Manual Electrical (Top Mod.) Lower Junction Box with Right and Left Grain High Limits Uper module lower junction box. Rt Grain high limit. Lt Grain high limit. 5 1 2 6 4 3 3 4 7 5 6 7 Grain temperature thermister. There are 2 thermisters in each (right & left) grain high limit thermostat assemblies.
2300 Series Parts Manual Electrical (Top Mod.) Plenum High Limit 1 11 7 12 9 Plenum high limit conduit (plenum pipe). See page 66 for air switch parts and page 67 for Network box parts. 13 14 15 16 17 18 19 ITEM No. DESCRIPTION PART No.
2300 Series Parts Manual Electrical (Top Mod.) Upper Juntion Box / Top Auger Motor Conduit Upper junction box. 1 2 9 8 10 7 5 Top auger motor conduit. Fill switch assembly (installed). 8 11 9 10 1 3 ITEM No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 4 5 DESCRIPTION CONDUIT 1/2" EMT METALLIC CONNECTOR 1/2" EMT COMPRESSION CLAMP 1/2" CONDUIT CONNECTOR 1/2" EMT TO SEALTITE SEALTITE PVC 1/2" ELBOW 1/2" 90 DEGREE PVC WITH 1/2" STRAIGHT PVC W/LOCKNUT ENCLOSURE 4x4x2.
2300 Series Parts Manual Electrical (Top Mod.) Wire Way Assembly 1c ITEM No. PART No.
2300 Series Parts Manual Electrical (Fan Heater) Vapor and Housing High Limits / Solenoid Conduits Fan Heater electrical conduits.
2300 Series Parts Manual Electrical (Fan Heater) Vapor and Housing High Limits / Solenoid Conduits Supply line solenoid junction box. 8 7 1 Low fire solenoid valve. 9 1 8 8 1 High fire solenoid valve. 9 8 10 1 1 ITEM No.
2300 Series Parts Manual Control Box Fan Heater Electrical Box Fan Heater control box and electrical components. 1 4 5 2 13 12 3 14 6 ITEM NUMBER PART NUMBER 1 2 2 2 3 4 4 5 6 F-942 CD-0005 CD-0065 CD-0193 FH-4429-1 CD-0202 CD-0203 HH-7048 HH-7016 11 26" & 28" FAN 36" FAN HEATERS HEATERS DESCRIPTION ELECT.
2300 Series Parts Manual Control box Fan Heater Electrical Box ITEM NUMBER DESCRIPTION 7 8 9 10 11 12 13 14 TERMINAL-BLOCK ENTRELEC 4MM TERMINAL-BLANK END PROTECTOR TERMINAL-ENTRELEC END STOP TERMINAL-ENTRELEC GRND BLOCK CONTACTOR OVERLOAD LUG GROUND,#TA-2 GRP-TRANSFORMER 2POLE IGNITION 10-12 HP FAN MOTORS (2612, 2812, 3612 FAN HEATERS) 220V 1Ph 208V 3Ph 220V 3Ph 440V 3Ph 575V 3Ph D01-0531 D01-0531 D01-0531 D01-0531 D01-0531 D01-0532 D01-0532 D01-0532 D01-0532 D01-0532 D01-0533 D01-0533 D01-0533 D01-05
2300 Series Parts Manual Control Box Control Box Switch Panel Network control panel (front). 1 11 2 3 15 14 4 13 5 12 11 6 ITEM NUMBER 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 7 8 9 DESCRIPTION DECAL, NETWORK DRYER 2 FAN HINGE 1-1/6 X 19GA SS SWITCH 2 POS. SELECTOR AMBER SWITCH 2 POS. SELECTOR GREEN SWITCH 3 POS. SELECTOR WHITE SWITCH 2 POS. SELECTOR CLEAR 3 POS. SELECTOR SWITCH YELLOW SWITCH 3 POS. SELECTOR BLUE SWITCH 3 POS.
2300 Series Parts Manual Control box Control Box Switch Panel (Rear) Network control panel (rear). 1 2 3 7 6 1 Detailed view of a two position switch. Detailed view of a single position switch. 4 4 5 5 4 ITEM NUMBER 1 2 3 4 5 6 7 DESCRIPTION LATCH, SOUTHCO SLOTTED NETWORK DRYER DISPLAY BOARD COMPUTER MOUNTING PLATE BLOCK, CONTACT N/O BLOCK, LIGHT 12/24/120V LAMPS SCR POTENTIOMETER 10K NETWORK SWITCH PANEL - 77 - CIRCUIT MISC. CONTROL MISC. CONTROL CONTROL CONTROL MISC.
2300 Series Parts Manual Control Box Lower Control Box Back Panel Lower control box back panel. 1 2 3 Emergency stop switch (outside). 10 11 Emergency stop switch (inside).
2300 Series Parts Manual Control box Upper Control Box Panel Upper control box power distribution panel.
DESCRIPTION POWER BOX UPPER BACK PANEL POWER BOX BACK PANEL OVERLOAD OVERLOAD OVERLOAD OVERLOAD CONTACTOR CONTACTOR CONTACTOR CONTACTOR TERMINAL-BLOCK ENTRELEC 4MM TERMINAL-BLANK END PROTECTOR TERMINAL-ENTRELEC END STOP TERMINAL-ENTRELEC GRND BLOCK RELAY, 3PDT 120V RH3B-U IDEC RELAY BASE, 3PDT TRANSFORMER TERMINAL GROUND BAR NETWORK DRYER CONTROL BOARD MOUNT PLATE NETWORK DRYER CONTROL BOARD NETWORK DRYER CONTROL BOARD COVER PLATE BREAKER 6 AMP 1 POLE 110VAC BREAKER 10 AMP 2 POLE DELAYED BREAKER 3 AMP 2 PO
DESCRIPTION POWER BOX UPPER BACK PANEL POWER BOX BACK PANEL OVERLOAD OVERLOAD OVERLOAD OVERLOAD CONTACTOR CONTACTOR CONTACTOR CONTACTOR TERMINAL-BLOCK ENTRELEC 4MM TERMINAL-BLANK END PROTECTOR TERMINAL-ENTRELEC END STOP TERMINAL-ENTRELEC GRND BLOCK RELAY, 3PDT 120V RH3B-U IDEC RELAY BASE, 3PDT TRANSFORMER TERMINAL GROUND BAR NETWORK DRYER CONTROL BOARD MOUNT PLATE NETWORK DRYER CONTROL BOARD NETWORK DRYER CONTROL BOARD COVER PLATE BREAKER 6 AMP 1 POLE 110VAC BREAKER 10 AMP 2 POLE DELAYED BREAKER 3 AMP 2 PO
DESCRIPTION POWER BOX UPPER BACK PANEL POWER BOX BACK PANEL OVERLOAD OVERLOAD OVERLOAD OVERLOAD CONTACTOR CONTACTOR CONTACTOR CONTACTOR TERMINAL-BLOCK ENTRELEC 4MM TERMINAL-BLANK END PROTECTOR TERMINAL-ENTRELEC END STOP TERMINAL-ENTRELEC GRND BLOCK RELAY, 3PDT 120V RH3B-U IDEC RELAY BASE, 3PDT TRANSFORMER TERMINAL GROUND BAR NETWORK DRYER CONTROL BOARD MOUNT PLATE NETWORK DRYER CONTROL BOARD NETWORK DRYER CONTROL BOARD COVER PLATE BREAKER 6 AMP 1 POLE 110VAC BREAKER 10 AMP 2 POLE DELAYED BREAKER 3 AMP 2 PO
DESCRIPTION POWER BOX UPPER BACK PANEL POWER BOX BACK PANEL OVERLOAD OVERLOAD OVERLOAD OVERLOAD CONTACTOR CONTACTOR CONTACTOR CONTACTOR TERMINAL-BLOCK ENTRELEC 4MM TERMINAL-BLANK END PROTECTOR TERMINAL-ENTRELEC END STOP TERMINAL-ENTRELEC GRND BLOCK RELAY, 3PDT 120V RH3B-U IDEC RELAY BASE, 3PDT TRANSFORMER TERMINAL GROUND BAR NETWORK DRYER CONTROL BOARD MOUNT PLATE NETWORK DRYER CONTROL BOARD NETWORK DRYER CONTROL BOARD COVER PLATE BREAKER 6 AMP 1 POLE 110VAC BREAKER 10 AMP 2 POLE DELAYED BREAKER 3 AMP 2 PO
DESCRIPTION POWER BOX UPPER BACK PANEL POWER BOX BACK PANEL OVERLOAD OVERLOAD OVERLOAD OVERLOAD CONTACTOR CONTACTOR CONTACTOR CONTACTOR TERMINAL-BLOCK ENTRELEC 4MM TERMINAL-BLANK END PROTECTOR TERMINAL-ENTRELEC END STOP TERMINAL-ENTRELEC GRND BLOCK RELAY, 3PDT 120V RH3B-U IDEC RELAY BASE, 3PDT TRANSFORMER TERMINAL GROUND BAR NETWORK DRYER CONTROL BOARD MOUNT PLATE NETWORK DRYER CONTROL BOARD NETWORK DRYER CONTROL BOARD COVER PLATE BREAKER 6 AMP 1 POLE 110VAC BREAKER 10 AMP 2 POLE DELAYED BREAKER 3 AMP 2 PO
NOTES - 85 -
NOTES - 86 -
NOTES - 87 -
1004 E. Illinois St.
