User guide

5. Required Tools and Critical Tool Characteristics
28 PNEG-1708 GSI Modular Tower Dryer
Comprehensive Tool List
• C6 Epoxy gun
• 1/4" Line up punches
• 1/2" x 9/16" Box end combination wrenches
• 1/2" Open end wrenches
• 9/16" Open end wrenches
• 32 OZ Ball peen hammers
• 5/8" Line up punches
• Small pry bars
• 3/8" Drive socket and extension
• 3/8" Drive 1/2" socket set
• 3/8" Drive 9/16" socket set
• 1/2" Drive socket set
• 4' Level
• Vice grips
• 25' Tape measures
• 15/16" Wrenches
• 15/16" Deep well 1/2" drive sockets
• 1/2" Deep well 1/2" drive sockets
• Short 1/2" 1/2" drive sockets
• 9/16" Deep well 1/2" drive sockets
• Caulk gun and 2 tubes of clear silicone
• 36" Pipe wrenches (rigid aluminum)
• 48" Pipe wrench (rigid aluminum)
• 18" Pipe wrenches
• Torque wrench (all 3/8" grade 8 bolts will need 45 ft./lbs.)
• 20' Ladders
• 6' Ladders
• 3/8" High speed drill bits
• 5/16" High speed drill bits
• 1/2" Impact wrenches
• 1/2" Drills
•1-1/2" Sockets
• Cordless sawzall
• 1-1/2" Hammer drill
• 1-1/8" Bits (hammer drill star bits)
• 3/8" and 5/16" Bit for impact driver
• 100' with a four (4) way box
• Air compressor with hose