User guide

11. Electrical Connections
PNEG-1708 GSI Modular Tower Dryer 69
Bindicator, Outside Overheat and Moisture Sensor
The bindicator is mounted on the roof with its wiring running the height of the dryer in conduit and is
connected by the customer is the field. (See Figure 11G.)
Figure 11G
The outside overheat (copper tubing) runs the circumference of the dryer on the roof module. It connects
to a junction box with conduit running the height of the dryer and is connected to the control panel by the
customer in the field. (See Figure 11H.)
Figure 11H
Bindicator
Conduit
Bindicator
Conduit
Junction box
Copper tubing