Field Installation of Sidekick™ Moisture Sampler Kit Installation Manual PNEG-1781 Date: 08-22-11 PNEG-1781
PNEG-1781 Field Installation of Sidekick™ Moisture Sampler Kit
Table of Contents Contents Chapter 1 Safety .....................................................................................................................................................4 Safety Guidelines .................................................................................................................................. 4 Safety Instructions .................................................................................................................................
1. Safety Safety Guidelines This manual contains information that is important for you, the owner/operator, to know and understand. This information relates to protecting personal safety and preventing equipment problems. It is the responsibility of the owner/operator to inform anyone operating or working in the area of this equipment of these safety guidelines. To help you recognize this information, we use the symbols that are defined below. Please read the manual and pay attention to these sections.
1. Safety Safety Instructions Our foremost concern is your safety and the safety of others associated with this equipment. We want to keep you as a customer. This manual is to help you understand safe operating procedures and some problems that may be encountered by the operator and other personnel. As owner and/or operator, it is your responsibility to know what requirements, hazards, and precautions exist, and to inform all personnel associated with the equipment or in the area.
2. Decals If the decal used for this installation is damaged or is missing contact: GSI Decals 1004 E. Illinois St. Assumption, IL. 62510 Phone: 1-217-226-4421 A free replacement will be sent to you. WARNING Automatically controlled belt drive can start at anytime. Keep hands clear. Failure to do so could result in serious injury. AVERTISSEMENT La conduite automatiquement contrôlée de la courroie peut démarrer à tout moment. Gardez les mains éloignées.
3. Installation Figure 3A NOTE: Belt guard removed for instructional purposes only. All guards should be in place when in operation. Remove Previous Moisture Sampler 1. Disconnect all power sources to equipment. 2. Disconnect any unload equipment mounted or attached to the current rear discharge box. 3. Remove belt guard, belt and the drive sheave on the unload auger shaft. 4. Detach the rear bearing from the discharge box and slide off shaft. 5.
3. Installation Installing the Sidekick™ Moisture Sampler Kit 1. Begin installation by attaching the new discharge auger with flappers (D04-0586) onto the auger stub under the rear wooden hanger bearing. 2. Next, install the rear auger stub at the other end of the discharge auger. (See Figure 3B.) Figure 3B 3. The new rear discharge with moisture sampler can now be bolted in the same location as the previous sampler using eight (8) bolts.
3. Installation 4. Slide the lock collar (D32-0001) onto the rear auger stub (D01-1994) and then the rear bearing. The bearing can now be mounted to the discharge box and then the lock collar set. (See Figure 3C.) NOTE: Moisture sample belt (D03-0848) is not shown. Figure 3C 5. Attach the drive sheave (018-1047-2) on the rear auger stub with the split taper bearing (D32-0016).
NOTES 10 PNEG-1781 Field Installation of Sidekick™ Moisture Sampler Kit
4. Warranty GSI Group, LLC Limited Warranty The GSI Group, LLC (“GSI”) warrants products which it manufactures to be free of defects in materials and workmanship under normal usage and conditions for a period of 12 months after sale to the original end-user or if a foreign sale, 14 months from arrival at port of discharge, whichever is earlier.
This equipment shall be installed in accordance with the current installation codes and applicable regulations, which should be carefully followed in all cases. Authorities having jurisdiction should be consulted before installations are made. GSI Group 1004 E. Illinois St. Assumption, IL 62510-0020 Phone: 1-217-226-4421 Fax: 1-217-226-4420 www.gsiag.
