999 Top Dry Wiring Diagrams 1999 Top Dry Wiring Diagrams PNEG-897 11
1999 Top Dry Wiring Diagrams 2
1999 Top Dry Wiring Diagrams TABLE OF CONTENTS Roof Damage and Disclaimer -------------------------------------------------------------- Page 4 Safety Decals --------------------------------------------------------------------------------- Page 5 Safety Precautions --------------------------------------------------------------------------- Page 6 Safety Sign-Off Sheet ----------------------------------------------------------------------- Page 7 Electrical Power Supply ----------------------------
SAFETY 1999 Top Dry Wiring Diagrams Roof Damage Warning and Disclaimer GSI DOES NOT WARRANT ANY ROOF DAMAGE CAUSED BY EXCESSIVE VACUUM OR INTERNAL PRESSURE FROM FANS OR OTHER AIR MOVING SYSTEMS. ADEQUATE VENTILATION AND/OR "MAKEUP AIR" DEVICES SHOULD BE PROVIDED FOR ALL POWERED AIR HANDLING SYSTEMS. GSI DOES NOT RECOMMEND THE USE OF DOWNWARD FLOW SYSTEMS (SUCTION). SEVERE ROOF DAMAGE CAN RESULT FROM ANY BLOCKAGE OF AIR PASSAGES.
1999 Top Dry Wiring Diagrams SAFETY Grain Systems, Inc. recommends contacting your local power company, and having a representative survey your installation so the wiring is compatible with their system, and adequate power is supplied to your unit. Safety decals should be read and understood by all people in the grain handling area. The rotating blade, fire warning decals and voltage danger decal must be displayed on the fan can.
SAFETY PRECAUTIONS 1999 Top Dry Wiring Diagrams READ THESE INSTRUCTIONS BEFORE OPERATION AND SERVICE SAVE FOR FUTURE REFERENCE 1. Read and understand the operating manual before trying to operate the dryer. Use Caution in the Operation of this Equipment The design and manufacture of this 2. Power supply should be OFF for service of electrical components. Use dryer is directed toward operator CAUTION in checking voltage or other procedures requiring power to safety.
1999 Top Dry Wiring Diagrams Date SAFETY SIGN-OFF SHEET Employer’s Signature Employee ________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________ ________________________________________________________________________________________________________________ __________________________________________________________________
ELECTRICAL POWER SUPPLY 1999 Top Dry Wiring Diagrams Power Supply An adequate power supply and proper wiring are important factors for maximum performance and long life of the dryer. Electrical service must be adequate enough to prevent low voltage damage to motors and control circuits (see Electrical Load Information). and the ignition system. The ground rod must be in accordance with local requirements. Proper Installation of Ground Rod It is not recommended that the rod be driven into dry ground.
1999 Top Dry Wiring Diagrams Series 2000 Master Fan/Heater Wiring Domestic & CGA Models 9
SERIES 2000 DOMESTIC & CGA 1999 Top Dry Wiring Diagrams Series 2000 Master Heater Board Input/Output 10
SERIES 2000 DOMESTIC & CGA Series 2000 Master 220v1ph & 220v3ph Internal Wiring 1999 Top Dry Wiring Diagrams 11
1999 Top Dry Wiring Diagrams SERIES 2000 DOMESTIC & CGA Series 2000 Master 460v3ph Internal Wiring 12
1999 Top Dry Wiring Diagrams SERIES 2000 DOMESTIC & CGA Series 2000 Master 575v3ph Internal Wiring 13
SERIES 2000 DOMESTIC & CGA 1999 Top Dry Wiring Diagrams Series 2000 Master External Wiring 14
SERIES 2000 DOMESTIC & CGA Series 2000 Master Ignitor/Probe Wiring 1999 Top Dry Wiring Diagrams 15
SERIES 2000 DOMESTIC & CGA 1999 Top Dry Wiring Diagrams Series 2000 Master 15 Hp 220v1ph Capacitor Wiring 16
1999 Top Dry Wiring Diagrams Series 2000 Master Fan/Heater Wiring European Models 17
1999 Top Dry Wiring Diagrams SERIES 2000 EUROPEAN Series 2000 Master Heater Board Input/Output 18
99 Top Dry Wiring Diagrams SERIES 2000 EUROPEAN Series 2000 Master 380v3ph Internal Wiring - European Models 19
1999 Top Dry Wiring Diagrams SERIES 2000 EUROPEAN Series 2000 Master 380v3ph External Wiring - European Models 20
1999 Top Dry Wiring Diagrams SERIES 2000 EUROPEAN Series 2000 Master Ignitor/Probe Wiring.
1999 Top Dry Wiring Diagrams 22
1999 Top Dry Wiring Diagrams Series 2000 Slave Fan/Heater Wiring Domestic, CGA, and European Models 23
1999 Top Dry Wiring Diagrams SERIES 2000 SLAVE Series 2000 Slave Heater Board Input/Output 24
1999 Top Dry Wiring Diagrams SERIES 2000 SLAVE Series 2000 Slave Internal Wiring 25
SERIES 2000 SLAVE 1999 Top Dry Wiring Diagrams Series 2000 Slave External Wiring 26
SERIES 2000 SLAVE Series 2000 Slave Ignitor/Probe Wiring 1999 Top Dry Wiring Diagrams 27
SERIES 2000 SLAVE 1999 Top Dry Wiring Diagrams Series 2000 Slave 15 Hp 220v1ph Capacitor Wiring 28
1999 Top Dry Wiring Diagrams Series 2000 Batch Control Box Wiring 29
SERIES 2000 BATCH CONTROLS 1999 Top Dry Wiring Diagrams Series 2000 Batch Remote Display Wiring - Domestic & CGA Units 30
1999 Top Dry Wiring Diagrams SERIES 2000 BATCH CONTROLS Series 2000 Batch Remote Display Wiring - European Units 31
SERIES 2000 BATCH CONTROLS 1999 Top Dry Wiring Diagrams Series 2000 Batch Economy Control Wiring - Domestic & CGA Units 32
1999 Top Dry Wiring Diagrams SERIES 2000 BATCH CONTROLS Series 2000 Batch Economy Control Wiring - European Units 33
1999 Top Dry Wiring Diagrams Series 2000 Autoflow Front Panel 34
1999 Top Dry Wiring Diagrams Series 2000 Autoflow Control Box Wiring 35
SERIES 2000 AUTOFLOW CONTROLS 1999 Top Dry Wiring Diagrams Series 2000 Autoflow Input/Output Board Wiring 36
1999 Top Dry Wiring Diagrams SERIES 2000 AUTOFLOW CONTROLS Series 2000Autoflow Terminal Strip Wiring 37
SERIES 2000 AUTOFLOW CONTROLS 1999 Top Dry Wiring Diagrams Series 2000 Autoflow Door Internal Wiring 38
1999 Top Dry Wiring Diagrams SERIES 2000 AUTOFLOW CONTROLS Series 2000Autoflow Door External Wiring 39
1999 Top Dry Wiring Diagrams Series 2000 Autoflow Actuator 40
1999 Top Dry Wiring Diagrams Series 2000 Autoflow Actuator Wiring 41
SERIES 2000 AUTOFLOW ACTUATOR 1999 Top Dry Wiring Diagrams Series 2000 Autoflow Actuator Schematic 42
1999 Top Dry Wiring Diagrams SERIES 2000 AUTOFLOW ACTUATOR Series 2000 Autoflow Actuator Wiring 43
1999 Top Dry Wiring Diagrams Series 2000 Autoflow Fill System Control Box 44
1999 Top Dry Wiring Diagrams Series 2000 Autoflow Fill System Control Box Wiring 45
FILL SYSTEM CONTROL BOX 1999 Top Dry Wiring Diagrams 0 - Fill Systems, 1 - Aeration Fan Internal Wiring 46
1999 Top Dry Wiring Diagrams FILL SYSTEM CONTROL BOX 0 - Fill Systems, 1 - Aeration Fan Door Wiring 47
FILL SYSTEM CONTROL BOX 1999 Top Dry Wiring Diagrams 1 - Fill Systems, 0 - Aeration Fan Internal Wiring 48
1999 Top Dry Wiring Diagrams FILL SYSTEM CONTROL BOX 1 - Fill Systems, 0 - Aeration Fan Door Wiring 49
FILL SYSTEM CONTROL BOX 1999 Top Dry Wiring Diagrams 1 - Fill Systems, 1 - Aeration Fan Internal Wiring 50
1999 Top Dry Wiring Diagrams FILL SYSTEM CONTROL BOX 1 - Fill Systems, 1 - Aeration Fan Door Wiring 51
FILL SYSTEM CONTROL BOX 1999 Top Dry Wiring Diagrams 2 - Fill Systems, 0 - Aeration Fan Internal Wiring 52
1999 Top Dry Wiring Diagrams FILL SYSTEM CONTROL BOX 2 - Fill Systems, 0 - Aeration Fan Door Wiring 53
FILL SYSTEM CONTROL BOX 1999 Top Dry Wiring Diagrams 2 - Fill Systems, 1 - Aeration Fan Internal Wiring 54
1999 Top Dry Wiring Diagrams FILL SYSTEM CONTROL BOX 2 - Fill Systems, 1 - Aeration Fan Door Wiring 55
1999 Top Dry Wiring Diagrams 56
1999 Top Dry Wiring Diagrams WARRANTY THE GSI GROUP, INC. ("GSI") WARRANTS ALL PRODUCTS MANUFACTURED BY GSI TO BE FREE OF DEFECTS IN MATERIAL AND WORKMANSHIP UNDER NORMAL USAGE AND CONDITIONS FOR A PERIOD OF TWELVE MONTHS AFTER RETAIL SALE TO THE ORIGINAL END USER OF SUCH PRODUCTS. GSI'S ONLY OBLIGATION IS, AND PURCHASER'S SOLE REMEDY SHALL BE FOR GSI, TO REPAIR OR REPLACE, AT GSI'S OPTION AND EXPENSE, PRODUCTS THAT, IN GSI'S SOLE JUDGMENT, CONTAIN A MATERIAL DEFECT DUE TO MATERIALS OR WORKMANSHIP.
1999 Top Dry Wiring Diagrams 1004 E. Illinois St.
