User Manual

Date: 09-27-10 PNEG-1778

Owner’s Manual

1004 East Illinois Street • Assumption, IL 62510 • 1-217-226-4421

PNEG-1778

Page 1 of 6

Printed in the U.S.A.

www.gsiag.com

36' Diameter 10K Roof

Rafter Instructions

2.66'' Corrugation Inside Stiffener Only

Figure 1

PAGE 1
004 East Illinois Street • Assumption, IL 62510 • 1-217-226-4421 Owner’s Manual 36' Diameter 10K Roof Rafter Instructions 2.66'' Corrugation Inside Stiffener Only Figure 1 Date: 09-27-10 PNEG-1778 Page 1 of 6 Printed in the U.S.A. Copyright © 2010 by GSI Group www.gsiag.
PAGE 2
36' Diameter 10K Roof Rafter Instructions 2.
PAGE 3
6' Diameter 10K Roof Rafter Instructions Special Roof Instructions for 36' Diameter Commercial 10K Roof The 36' diameter commercial 10K roof comes standard with 12 roof rafter assemblies that are not included in the 30° roof manual (PNEG-030). Install one roof rafter per sidewall sheet. Please refer to the roof manual for the complete roof assembly details. NOTE: Each rafter has two (2) sections.
PAGE 4
36' Diameter 10K Roof Rafter Instructions Special Roof Instructions for 36' Diameter Commercial 10K Roof (Continued) Figure 4 Page 4 of 6 PNEG-1778
PAGE 5
36' Diameter 10K Roof Rafter Instructions 36' 10K Roof Truss Assembly Figure 5 Adjust tension rods to slight tension (do not overtighten), before removing center support jack.
PAGE 6
36' Diameter 10K Roof Rafter Instructions 36' 10K Lower Roof Truss Assembly Figure 6 Page 6 of 6 PNEG-1778