Assembly Instructions 21 ½” 41 ¼” 2-person assembly 73 ¾” PH #2 Model # Finish GP0803 Brushed White GP0816 Brushed Driftwood GP0840 Brushed Grey Thank you for choosing Grain Wood Furniture, it is an honor to be in your home! If you have any questions, feedback, or need replacement parts please contact us at: grainwoodfurniture.com/help or support@grainwoodfurniture.
PLEASE READ BELOW BEFORE BEGINNING ASSEMBLY Ÿ Enlist help from a friend or family member as most items require two people for proper assembly. Ÿ Choose a spacious, open area near where the piece will be located once assembled. It is easier to move parts than to relocate the furniture after it is fully assembled. Ÿ Do not throw away packaging material until assembly is complete.
HARDWARE LIST A1 4,0x30 34 + 2 F10 A4 3,5x14 8+1 G1 A9 3,5x16 41 + 2 A16 4,0x40 6+1 A18 4,0x25 2+1 A25 M4x25 6+1 B31 6,0x10 20 + 1 A8 C2 8,0x25 44 + 2 F8 2 D4 metal 4+1 F9 1 D10 2 D21 2+1 RIGHT Side E17 6 10x10 30 + 2 4 H11 6 ANTI-TIPPING RESTRAINT KIT 3,0x20 2+1 2 450mm - 17 3/4" Drawer RIGHT E17 2 450mm - 17 3/4" LEFT Side E18 2 450mm - 17 3/4" Drawer LEFT E18 450mm - 17 3/4" 2 ! ATTENTION Before starting assembly please verify the hardware set is
01 07 15 07 17 02 04 03 26 19 20 16 18 14 09 06 12 05 10 08 11 13 Part # 01 02 03 07 15 20 Box A - 1 of 2 Description Right side Left side Back panel Profile “H” Door stop Qty.
1) 04 26 06 05 14 13 2x C2 10 09 2x 2x 02 03 Tip : Use a hammer in case dowels are hard to install by hand. Attach hinge ( F10 ) to hinge plate if it comes separated. Push hinge against plate until it clicks.
2) B31 02 B31 B31 B31 B31 B31 B31 E17 E17 B31 B31 03 B31 B31 B31 B31 B31 B31 E18 E18 E17 A9 E17 A4 3,5x14 4 B31 D10 3,5x16 12 E18 6,0x10 12 2 F10 RIGHT Side 2 450mm - 17 3/4" LEFT Side 2 450mm - 17 3/4" 6 3) 02 14 Attention: There are no predrilled holes for the A1 screws on part 02.
Attention: There are no predrilled holes for the A18 screws on parts 02 and 03. 4) 06 02 04 26 04 14 06 03 05 A1 Attention: There are no predrilled holes for the A1 screws on parts 02 and 03. A18 4,0x30 4,0x25 11 2 Attention: There are no predrilled holes for the A16 screws on parts 02 and 03.
Make sure back panels are perfectly aligned with side panels and top and there are NO gaps.
8) 15 07 15 07 4 G11 9) G1 G1 G1 G1 G1 G1 G1 G1 G1 G1 G1 G1 G1 G1 G1 G1 G1 G1 G1 G1 G1 G1 G1 G1 10x10 22 page 9/16
Attention: There are no predrilled holes for the A9 screws on parts 06 and 07. 10) 2 /2 71 " 07 07 06 A9 3,5x16 12 11) 17 17 Attention: There are no predrilled holes for the A4 screws on parts 02 and 03.
12) 19 13) 19 A9 A25 H11 3,5x16 M4x25 6 1 1 Attention: There are no predrilled holes for the A9 screws on part 19.
14) 18 15) 20 Attention: There are no predrilled holes for the A9 screws on part 18.
16) 3. 3. 2. 2. 3. 1. 1. 2. 2. 1. 1.
17) 2x 10 A1 09 A1 A1 08 11 Attention: There are no predrilled holes for the A1 screws on part 08.
18) Flip the assembled drawer upside down to install glides. B31 2x E17 B31 B31 B31 E18 B31 B31 B31 6,0x10 Drawer RIGHT E17 8 2 E18 450mm - 17 3/4" 19) Drawer LEFT 2 450mm - 17 3/4" 2x H11 H11 A25 A25 A25 H11 M4x25 4 4 20) Place the labeled drawer on the top position.
ANTI-TIPPING RESTRAINT KIT 21) ! Install against the furniture A8 on the wall A8 F8 F8 F9 WALLBOARD Anchors and screws are not included, choose best type based on your wall F8 A8 3,0x20 2 F8 2 F9 1 WALLBOARD Install both parts F8 Tighten them together using the safety strap page 16/16
