Assembly Instructions

10
OPERATION
Read and understand this entire owner’s manual, including all safety information,
before plugging in or using this product. Failure to do so could result in electric shock,
re, serious injury, or death.
POWER
Make sure the ON/OFF switch, located on the left side panel, is in the OFF position. Plug the power
cord into a 110 Volt 15 Amp grounded outlet (see IMPORTANT SAFETY INFORMATION on Pages
2 and 3). Make sure the outlet is in good condition and that the plug is not loose. NEVER exceed
the maximum amperage for the circuit. DO NOT plug other appliances into the same circuit.
METHODS OF OPERATION
This electric replace can be operated by the CONTROL PANEL, located on the left side panel of
the replace (see gure below), or by the batter
y-powered REMOTE CONTROL. Before operating,
please review the IMPORTANT SAFETY INFORMATION on Pages 2 and 3, and heed all warnings.
Front View
Back View
Heat Enabling
Switch
Top View
FLAME
FLAME + -
BACK LIGHT
BACK LIGHT +-
FLAME SPEED
TIMER +
TIMER-
HEATER
THERMOSTAT
FLAME
FLAME + -
BACK LIGHT
BACK
LIGHT +-
FLAME SPEED
TIMER +
TIMER-
THERMOSTAT
Back Light
Connector Plug
Left Side View
Heat Vent
Control
Panel
Indicator
Lights