Assembly Instructions

12
REMOTE CONTROL FUNCTIONS
MAIN POWER ON THE FIREPLACE CONTROL PANEL MUST BE IN THE ON
POSITION TO USE REMOTE CONTROL.
NOTICE
REMOTE CONTROL BUTTONS FUNCTION
Press once to turn flame ON.
Press again to turn flame OFF.
Press Heater Button once, 750W (LOW HEAT)
heater turns on and the fan starts to blow warm air.
Press Heater Button again turns on 1,500W (HIGH
HEAT) heater turns on and blows hot air. Press Heat-
er Button again and the heater turns OFF. The fan will
continue to blow to allow heater to cool down, and then
turns off. NOTE: The Heat Enabling Switch (on the
back of the unit) must be ON for the Heater function
to operate.
Press once to turn on Flame feature. This button must
be ON for (+/-) button to work.
Press Flame (+/-) Button to desired flame brightness.
3 options. ONLY works when Flame button is ON.
Press Timer (+) once to increase timer setting by ½
hour increments. Maximum timer setting is 7½ hours.
Indicator light will illuminate.
Press Timer(-) once to decrease timer setting by 1
hour increments.
Press Flame Speed Button to desired flame speed.
5 options.
Press Back Light Button to desired back light color.
10 different color options.
Press Back Light (+/-) Button to desired back light
brightness. 3 options. ONLY works when Back Light
button in ON.
+ -
+ -
To improve operation, aim the remote control at the front of the fireplace.
DO NOT press the buttons too quickly. Give the unit time to respond to each
command.
NOTICE