Assembly Instructions

MEDIA BED INSTALLATION

This next step involves GLASS! ALWAYS use extreme caution when handling glass.

Failure to do so could result in personal injury or property damage.

NOTE: The fireplace comes with the Faux Log Bed in place, and can be used as is. To switch to

crushed glass, rocks or faux branches, follow these steps with two capable adults.

STEP 6: You must unplug the backlight connector prior to completing any further steps.

When facing the unit, the connector plug is located on the left of the fireplace.

STEP 6a: While one person holds the glass panel, remove the two screws at the top edge of the

fireplace with a screwdriver. Together, carefully remove the front glass panel and set it

aside on a clean soft surface.

STEP 6b: Remove the two log bed screws (one at each end of the log bed), and lift the log bed out.

6 6a

Loosen

Back Light

Connector Plug

ALWAYS keep the decorative glass OUT OF REACH OF CHILDREN AND PETS! Leave

no glass pieces where children or pets can find them. Failure to do so could cause a

choking hazard.

Faux Log Bed