Installation Sheet

Tall Plate Door Hardware

PK 184 9212017

Single Dummy

tall plate

tall

(Measure other

doors in the

house to

determine this.)

For doors without a 2-1/8” cross-bore

Using a 7/64” drill bit, drill the screws through

the door at least 3/4” deep.

For assistance call 800-522-7336 Monday through Friday 7am to 6pm Mountain Time

or visit www.grandeurhardware.com

PK184 10022017

PAGE 1
Tall Plate Door Hardware Single Dummy For doors without a 2-1/8” cross-bore tall plate (Measure other doors in the house to determine this.) Using a 7/64” drill bit, drill the screws through the door at least 3/4” deep. For assistance call 800-522-7336 Monday through Friday 7am to 6pm Mountain Time or visit www.grandeurhardware.
PAGE 2
Tall Plate Door Hardware Double Dummy tall plate (Measure other doors in the house to determine this.) Using a 1/4” drill bit, drill the screws through the door. Intall screw extenders into exterior tall plate. tall Tighten Screw securely. Extenders (part #8) Place the exterior plate on the outside of the door. Door Outside For assistance call 800-522-7336 Monday through Friday 7am to 6pm Mountain Time or visit www.grandeurhardware.