Installation Guide

For 2-3/8”

Backset:

For 2-3/4”

Backset:

Skip to Step if your door has pre-drilled bore holes.

For assistance call 1-844-372-6848 Monday through Friday, 7 am to 5 pm Mountain Time

or visit www.GrandeurHardware.com/support

See “Door Prep Template”

Threaded Privacy Pin Hole

Anti-

Rotation

Block

Latch

Tongue

(Privacy Only)

Star-

Shaped

Hub

Emergency Release Hole

(Privacy Only)

Screw in the

Privacy Pin

(Privacy Only)

(1)

(2)

Updated June 2016

PK143 Rev.3 06022016

Passage/Privacy

PAGE 1
Passage/Privacy Updated June 2016 Skip to Step if your door has pre-drilled bore holes. For 2-3/8” Backset: See “Door Prep Template” For 2-3/4” Backset: Threaded Privacy Pin Hole (Privacy Only) (1) StarShaped Hub (2) AntiRotation Block Emergency Release Hole (Privacy Only) Latch Tongue Screw in the Privacy Pin (Privacy Only) For assistance call 1-844-372-6848 Monday through Friday, 7 am to 5 pm Mountain Time or visit www.GrandeurHardware.com/support PK143 Rev.
PAGE 2
PK143 Rev.
PAGE 3
Single Cylinder Deadbolt Door Hardware Installation Instructions For thicker doors, please call customer service. Updated July June2015 2016 Updated A B Face of Door For 2-3/8” Backset 3-1/2” 2-3/8” Cross Bore Hole 2-1/8” Diameter Edge of Door Edge Bore Hole - 1” Diameter Centerline Faceplate Mortise Area Centerline 2-3/4” 3-3/4” Door Thickness For 2-3/4” Backset C D Deadbolt Latch ! Tailpiece must be VERTICAL during installation.
PAGE 4
Part # 1 2 3 4 4A 5A 5B 6 7 8 9 10 11 12 13 Part Description Latch Latch Faceplate Latch & Strike Wood Screws (4) Cylinder Body Tailpiece Spin Ring Outside Escutcheon Deadbolt Adapter Plate 2-3/8” Machine Screws (2) Thumbturn Assembly 5/8” Thumbturn Machine Screws (2) Dust Box Door Frame Reinforcer 3” Reinforcer Wood Screws (2) Strike Plate For Assistance Call: Page 2 – PK147 Rev.2 07212015 8 am - 5 pm, Monday - Friday, MST TM 1-800-522-7336 PK147 Rev.