Use and Care Manual

BA-S1

BA-S2

BA-S1

BA-S2

BA-C3

BA-S3

BA-S4

BA-C3

BA-C4

BA-C3

BA-A1

BA-S4

BA-S3

8x24 BASE KIT ASSEMBLY INSTRUCTIONS

(GRA-BA-8) AND (GRA-BA-8X) AND (GRA-BA-8X)

1.7 Layout all base kit pieces to prepare for assembly. Note that one BA-S1 will be at the front

and one BA-S1 will be at the back and the BA-S2’s will be on the sides attaching to front BA-S1.

The BA-S3 and BA-S4 will attach to the back BA-S1. The BA-S3 will attach to the other BA-S3

and BA-S4 will attach to the other BA-S4 See diagram .

1.8 Attach the BA-S2 to the BA-S3 with the BA-C4 using the BA-S03 and BA-M03.

See . Repeat for other side connecting the BA-S4 and the BA-S2, and then the BA-S3

to the BA-S3, and then the BA-S4 to the BA-S4.

Go to page 18 for the next step.

97.5”

286”

STEP ONE

BA-C4

BA-S5

BA-S2

BA-S03

BA-M03

BA-C4

BA-S10

BA-C4

BA-S10

GRANDIO

TIP

Note that the holes for

screws on the base kit

sides have about a 2 foot gap between

each, so be sure base kit extensions

are assembled properly. See .

Front

Back

BA-C4

BA-A1