Installation Guide

ALUMINUM SHADE NET

INSTALLATION INSTRUCTIONS

PARTS LIST

NOTE: Install your shade net on a calm day. It will require 2 people for installation.

1. Close all roof vents completely prior to installation.

2. Use the provided drill bit to drill a hole at the halfway point between on the base kit, or if you have

a longer unit space out the holes for the eyebolt about every 4 feet according to how many eyebolts

came in your kit see .

3. See , remove the top bolt and switch to the eyebolt on both sides of the base kit.

Note: Eyebolt and flat washer on outside of base, and the nut on the inside of the base kit see

diagram .

Part Name

Shade Net

Eye Bolt

Flat Washer

Nut

1/4” Drill Bit

Rope

8’ x 8’ Greenhouse

8’ 6” x 14’

50’

8’ x 12’ Greenhouse

12’ 6” x 14’

100’

8’ x 16’ Greenhouse

16’ 6” x 14’

100’

16 feet

8 feet

Image

8 feet

GREENHOU S E S

GRANDIO

PAGE 1
GRANDIO ALUMINUM SHADE NET INSTALLATION INSTRUCTIONS G R E E N H O U S E S PARTS LIST Image Part Name 8’ x 8’ Greenhouse 8’ x 12’ Greenhouse 8’ x 16’ Greenhouse Shade Net 8’ 6” x 14’ 12’ 6” x 14’ 16’ 6” x 14’ Eye Bolt 6 8 10 Flat Washer 6 8 10 Nut 6 8 10 1/4” Drill Bit 1 1 1 Rope 50’ 100’ 100’ NOTE: Install your shade net on a calm day. It will require 2 people for installation. 1. Close all roof vents completely prior to installation. 2.
PAGE 2
4. Place the shade net in front of your Greenhouse. The front of the shade net measures 14’, fold the shade net in an accordion fashion for the easiest installation see . 5. With the help of another person, lift the folded shade net and place it over the front of your green- house, then gently roll out across the entire greenhouse. 6. Open all Roof Vents, then use rope to tie the shade net down weaving from the grommet to the eyebolts as shown in .