Full Product Manual

GrandPrix Two-Post Lifts 16 P/N 5900209 — Rev. D3 — Feb. 2020
To identify the Powerside Post and the Offside Post, look at the tops of the Lift Heads in each of the
Posts:
• Powerside Post. The Lift Head with widely spaced holes is the Powerside Post. The Powerside
Post must go under the Cylinder End of the Top Trough.
• Offside Post. The Lift Head with the narrowly spaced holes must be the Offside Post. The
Offside Post must go under the Cable End of the Top Trough.
Important: You
must orient the Powerside and Offside Posts this way. If they are set up wrong,
the Lift will not work correctly.
Unloading and Unpacking
Unload the Lift components as close to the installation location as possible.
Once the components are unloaded, they are your responsibility to move around. The Lift includes a
number of heavy pieces, so the closer you unload them to the installation location, the better off you
will be.
⚠ WARNING Some Lift components are very heavy; if handled incorrectly, they can damage
materials like tile, sandstone, and brick. Try to handle the Lift components just
twice: once when delivered and once when moved into position. You must have a
forklift or crane to move some of the Lift components into position. Use care when
moving them around.