Full Product Manual

GrandPrix Two-Post Lifts 23 P/N 5900209 — Rev. D3 — Feb. 2020
Once past the hole in the Base Plate, the Anchor Bolt eventually stops going down into the hole as
the Expansion Sleeve contacts the sides of the hole; this is normal.
7. Hammer or mallet the Anchor Bolt the rest of the way down into the hole.
Stop when the Washer is snug against the Base Plate.
8. Plumb each Post; install any needed Shims or the optional Adapter Trays (which let you stack the
provided Auxiliary Adapters — also called Extenders — conveniently near the Lift Arms).
9.
Do not torque the Anchor Bolts at this point .
Installing the Top Trough and doing final leveling (both of which are done later in the installation
process) are both easier if there is a little bit of play in the Posts.
If you torque the Anchor Bolts now, there will not be any play in the Posts, making it more difficult
to install the Top Trough and do final leveling.