Full Product Manual

GrandPrix Two-Post Lifts 24 P/N 5900209 — Rev. D3 — Feb. 2020
About the Lifting Cables
⚠ CAUTION We strongly recommend wearing gloves while handling the Lifting Cables.
GP-7 Series Lifts use four Lifting Cables: two Long Cables and two Short Cables. The following
drawing shows the
two different types of ends on these cables. Note that the ends are
exaggerated in this drawing to make it easier to see the two types of ends.
The Button end of all four cables
start at the same place (at the Tie Plate, in the Top Trough, shown in
the upper left corner in the drawing below).
The Threaded end of the two Short Cables end at the Offside Lift Head. The Threaded end of the two
Long Cables end at the Powerside Lift Head.
The following drawing shows the routing for the Lifting Cables. The Top Trough and both posts have
been removed so you can see just the Lifting Cables and associated components.
Both short cables are exactly the same; it does not matter what order you install them in. Both long
cables are also exactly the same.