Full Product Manual

GrandPrix Two-Post Lifts 4 P/N 5900209 — Rev. D3 — Feb. 2020
Shipping Information
Your equipment was carefully checked before shipping. Nevertheless, you should thoroughly inspect
the shipment
before you sign to acknowledge that you received it.
When you sign the bill of lading, it tells the carrier that the items on the invoice were received in good
condition.
Do not sign the bill of lading until
after
you have inspected the shipment.
If any of the
items listed on the bill of lading are missing or damaged, do not accept the shipment until the carrier
makes a notation on the bill of lading that lists the missing or damaged goods.
If you discover missing or damaged goods
after you receive the shipment and have signed the bill of
lading, notify the carrier at once and request the carrier to make an inspection. If the carrier will not
make an inspection, prepare a signed statement to the effect that you have notified the carrier (on a
specific date) and that the carrier has failed to comply with your request.
It is difficult to collect for loss or damage after you have given the carrier a signed bill of lading. If this
happens to you, file a claim with the carrier promptly. Support your claim with copies of the bill of
lading, freight bill, invoice, and photographs, if available. Our willingness to assist in helping you
process your claim does not make us responsible for collection of claims or replacement of lost or
damaged materials.
Safety Considerations
Read this manual carefully before using your new product. Do not install or operate the
product until you are familiar with all operating instructions and warnings. Do not allow anyone else to
operate the product until they are also familiar with all operating instructions and warnings.
Safety Information
Please note the following:
• GP-7 Series Lifts are two-post Lifts.
Use them only for their intended purpose. If you are
looking for a
parking
Lift, visit the Bendpak website.
• Only operate your Lift between temperatures of 41°F to 104°F (5°C to 40°C).
• The product should only be operated by authorized personnel. Keep children and untrained
personnel away from the product.
• Do not use the product while tired or under the influence of drugs, alcohol, or medication.
• Do not make any modifications to the product; this voids the warranty and increases the chances
of injury or property damage.
• Make sure all operators read and understand the Installation and Operation Manual. Keep the
manual near the device at all times.
• Make a visual inspection of the product before using it. Do not use the product if you find any
missing or damaged parts. Instead, contact an authorized repair facility, your distributor, or
BendPak at [phone] or [e-mail].
• BendPak recommends making a
thorough inspection of the product at least once a year.
Replace any damaged or severely worn parts, decals, or warning labels.