Full Product Manual

GrandPrix Two-Post Lifts 59 P/N 5900209 — Rev. D3 — Feb. 2020
Lowering the Lift
To lower the Lift, you first raise it a small amount to get it off the Safety Lock, then bring it down.
To lower the Lift:
1. Check under and around the Vehicle to make sure the area is clear of all obstructions. If you find
any, move them out of the way.
2. Press and hold the
Up Pushbutton for a few seconds to move the Lift off its Safety Locks.
Raise the Lift at least two inches to get clear of the Safety Locks.
3. Push in and hold the Safety Lock Release Handle (on the Powerside Post above the Power Unit).
4. Push down and hold the Lowering Handle (on the Power Unit).
Both the Safety Lock Release Handle and the Lowering Handle must be held
down at the same time to lower the Lift.
⚠ WARNING: Do not override the Lift controls; they are designed specifically to return to off when
released. If the Lift controls are overridden, the Vehicle could fall off the Lift, possibly
causing damage to the Vehicle, damage to the Lift, or injuries to the Lift operator or
anyone else in the immediate vicinity.
Remain clear of the Lift as it comes down; obey the pinch point warning decals.
5. When the Lift is fully lowered, release both handles, then move the Lift Arms to their full drive-thru
positions.
6. Drive the Vehicle out.