HandyTone-496 Analog Telephone Adaptor User Manual

HandyTone-496 User Manual Grandstream Networks, Inc.

PPPoE Service Name

This field is optional. If your ISP uses a service name for the PPPoE

connection, enter the service name here. Default is blank.

Device Mode

To use the device as a router or a bridge.

Cloned WAN MAC

Address:

Allow the user to set a specific MAC address. Set in Hex format

LAN Subnet Mask

Sets the LAN subnet mask. Default value is 255.255.255.0

LAN DHCP Base IP:

Base IP for the LAN port which functions as a Gateway for the subnet.

Default value is 192.168.2.1

DHCP IP Lease Time:

Value is set in units of hours. Default value is 120hr (5 Days.) The time IP

address are assigned to the LAN clients

DMZ IP:

Forward all WAN IP traffic to a specific IP address if no matching port is

used by HandyTone-496 itself or in the defined port forwarding.

Port Forwarding:

Allow users to forward a matching (TCP/UDP) port to a specific LAN IP

address with a specific (TCP/UDP) port.

In addition to the Basic Settings configuration page, end users also have access to the device Status

page. The following is a snap shot of the device Status page. Details will be explained next.

Grandstream Device Configuration

STATUS BASIC SETTINGS ADVANCED SETTINGS FXS PORT1 FXS PORT2

MAC Address:

00.0B.82.03.C8.AF

WAN IP Address:

192.168.1.187

Product Model:

HT496

Software Version:

Program-- 1.0.3.44 Bootloader-- 1.0.8.11 HTML-- 1.0.3.44 VOC-- 1.0.0.10

stem Up Time:

2 day(s) 0 hour(s) 9 minute(s)

istered:

Yes

PPPoE Link Up:

disabled

NAT:

detected NAT type is full cone