user manual

GXV-3000 User Manual Grandstream Networks, Inc.
- 36 -
Account Active
This field indicates whether the account is active or not. The default value for
the primary account Account 1 is Yes. The default values for the other three
accounts are No.
Account Name
A name to identify an account which will be displayed in LCD.
SIP Server
SIP Server’s IP address or Domain name provided by VoIP service provider.
Outbound Proxy
IP address or Domain name of Outbound Proxy, or Media Gateway, or Session
Border Controller. Used by GXV-3000 for firewall or NAT penetration in
different network environment. If symmetric NAT is detected, STUN will not
work and ONLY outbound proxy can provide solution for it.
SIP User ID
User account information, provided by VoIP service provider (ITSP), usually
has the form of digit similar to phone number or actually a phone number.
Authenticate ID
SIP service subscriber’s Authenticate ID used for authentication. Can be
identical to or different from SIP User ID.
Authenticate
Password
SIP service subscriber’s account password for GXV-3000 to register to (SIP)
servers of ITSP.
Name
SIP service subscriber’s name which will be used for Caller ID display.
Use DNS SRV:
Default is No. If set to Yes the client will use DNS SRV to look up server.
User ID is Phone
Number
If the GXV-3000 has an assigned PSTN telephone number, this field should
be set to “Yes”. Otherwise, set it to “No”. If “Yes” is set, a “user=phone”
parameter will be attached to the “From” header in SIP request
SIP Registration
This parameter controls whether the GXV-3000 needs to send REGISTER
messages to the proxy server. The default setting is “Yes”.
Unregister on Reboot
Default is No. If set to yes, the SIP user’s registration information will be
cleared on reboot.
Register Expiration
This parameter allows user to specify the time frequency (in minutes) that
GXV-3000 refreshes its registration with the specified registrar. The default
interval is 60 minutes (or 1 hour). The maximum interval is 65535 minutes
(about 45 days).
Local SIP port
This parameter defines the local SIP port the GXV-3000 will listen and
transmit. The default value for Account 1 is 5060. It is 5062, 5064, 5066 for
Account 2, Account 3 and Account 4 respectively.