Owner's manual

HARDWARE FEATURES
• Headset with auto switch when in use
• 10/100 Mbps Full/Half Duplex Ethernet Switch with LAN and PC port,
• Auto detect Ethernet polarity - use either straight through or twist cable
• Message Waiting Indicator – RED LED
T
ABLE 2: TECHNICAL HARDWARE SPECIFICATIONS
LAN interface
2 x RJ45 10/100Mbps Ethernet Ports
Headset Jack
2.5mm Headset port
LED
1 LED in RED color
Phone Case
25-button keypad
12-digit caller ID LCD
Universal Switching
Power Adaptor
Input: 100-240VAC 50-60 Hz
Output: +5VDC, 1200mA, UL certified
Dimension
18cm (W) x 22cm (D) x 6.5cm (H)
Weight
0.9kg (2lbs)
Temperature
40 - 130ºF | 5 – 45ºC
Humidity
10% - 90%
(non-condensing)
Compliance
FCC / CE / C-Tick
USING THE BT–200 IP PHONE
GETTING FAMILIAR WITH THE LCD / LED
BT–200 has a numeric backlit LCD measuring 64mm x 24mm which displays icons to illustrate the
mode(s) of the phone. The LCD turns on with an incoming call. If voicemail is configured, there is also a
RED LED message indicator.
F
IGURE 2: BT–200 LCD ILLUSTRATION
Grandstream Networks, Inc. BT-200 User Manual Page 9 of 35
Firmware 1.1.1.14 Last Updated: 12/2006