User's Manual

P a g e | 31
DP750/DP720 User Guide
Checking System Status
You can view the system status on your handset including the following information of the system:
Table 10: DP720 Info description
Item
Description
Model
Displays the handset model. DP720
Firmware
Displays the current firmware version installed on DP720. i.e.: 1.0.0.14
Hardware
Displays the hardware version of DP720. i.e.: 1.4A
IPEI
International Portable Equipment Identifier.
Unique “serial number” for DECT handsets.
DECT Region
Displays region of DECT. i.e. EU or US
IP Address
Displays IP address of the base station DP750 if registered.
Subnet Mask
Displays Subnet Mask of the base station DP750 if registered.
Gateway
Displays Gateway IP of the base station DP750 if registered.
MAC address
Displays MAC address of the base station DP750 if registered.
To check the handset status:
1. Press Menu (left soft key or the selection key ) to bring up operation menu.
2. Use Navigation keys to reach Settings menu
3. Browse sub-menus until reaching Info sub-menu and press Select.
Basic Network Settings
Once connected to the network the base station attempts to contact a DHCP server to obtain valid network
settings (e.g., IP address, subnet mask, gateway address and DNS address) by default.
The users could also configure basic network settings manually. In order to configure the network settings
manually, please follow the steps bellow:
1. Press Menu (left soft key or the selection key ) to bring up operation menu.
2. Use Navigation keys to reach Settings menu
3. Navigate to select NetworkSettings.
4. Enter the system PIN (default: 0000) and press the soft key Save (Left arrow key),
5. To change to static IP, pressorto select Static from the IP Settings field.
6. Enter valid values in the IP Address, Subnet Mask, Gateway, DNS Server fields.