User's Manual

P a g e | 29
DP750/DP720 User Guide
Locate Via DP750 Base Station
1. On DP750 Base station back side, press Radio/Page button
2. All registered handsets will receive Paging call.
3. Once located, you can end the paging calling by pressing any key on the handsets or by pressing
again Radio/Page button
Understanding DP720/750 Voice Prompt
DP720 Base Station has a built-in voice prompt menu for simple device configuration. The IVR menu work
with any Handset registered to the base. Pick up the handset and dial “***” to use the IVR menu.
Table 9: Voice Prompt Menu
Menu
Voice Prompt
Options
Main
Menu
“Enter a Menu
Option”
Press “*” for the next menu option
Press “#” to return to the main menu
Enter 01-05, 07,10, 13-17,47 or 99 menu options
01
“DHCP Mode”,
“Static IP Mode”
Press “9” to toggle the selection
If using “Static IP Mode”, configure the IP address
information using menus 02 to 05.
If using “Dynamic IP Mode”, all IP address information
comes from the DHCP server automatically after
reboot.
02
“IP Address “ + IP
address
The current WAN IP address is announced
If using “Static IP Mode”, enter 12 digit new IP
address. You need to reboot the DP750 for the new
IP address to take Effect.
03
“Subnet “ + IP
address
Same as menu 02
04
“Gateway “ + IP
address
Same as menu 02
05
“DNS Server “ + IP
address
Same as menu 02