User's Manual

P a g e | 46
DP750/DP720 User Guide
2. Press the dial key or the speaker key . If there are multiple lines assigned to your handset
as outgoing lines, select the desired line. If you do not select a line, the handset uses the
default outgoing line to dial out.
3. Press the dial key or the left soft key Call .
4. To terminate the call, press the hang-up key .
Method2:
1. Press the dial key or the speaker key to enter the pre- dialing screen.
2. Enter the number to dial using the keypad.
3. Press the dial key , # (Use # as dial key” must be configured in web configuration) or wait
for 4 seconds and the call will be lunched automatically.
4. To finish the call, press the hang-up key
During the call, you can switch the call mode by pressing the corresponding keys and cancel the dialing
operation by pressing the on-hook key. During the call conversations, you can press the left and right
navigation keys to adjust the volume. The call duration is displayed on the LCD screen while the call is in
progress and call summary will be displayed once the call is terminated.
Dialing from Call history
Users may use their call history entries to initiate calls.
1. Press Menu (left soft key or the selection key ) to bring up operation menu.
2. Use Navigation keys to reach Call HistoryIcon and then press Select (left soft key ).
3. Select the desired entry, then press either dial key or Options key>Edit and Dial >Call to
establish the call.
The call history list stores the last dialed phone numbers. When the memory of the redial number list is full,
the handset will automatically erase the oldest dialed number when a new number is dialed
Answering Calls
When receiving an incoming call, you can answer the call using following steps:
1. Press the dial keyto pick up the call or the Accept Soft key (left soft key).
2. To answer an incoming call when you’re already in another call, press the dial key , or