Grandstream Networks, Inc.
COPYRIGHT ©2016 Grandstream Networks, Inc. http://www.grandstream.com All rights reserved. Information in this document is subject to change without notice. Reproduction or transmittal of the entire or any part, in any form or by any means, electronic or print, for any purpose without the express written permission of Grandstream Networks, Inc. is not permitted. The latest electronic version of this guide is available for download here: http://www.grandstream.
GNU GPL INFORMATION DP760 firmware contains third-party software licensed under the GNU General Public License (GPL). Grandstream uses software under the specific terms of the GPL. Please see the GNU General Public License (GPL) for the exact terms and conditions of the license. Grandstream GNU GPL related source code can be downloaded from Grandstream website from: http://www.grandstream.
Table of Contents DOCUMENT PURPOSE ................................................................................................. 7 CHANGE LOG ................................................................................................................ 8 Firmware Version 1.0.3.7 ....................................................................................................................... 8 GUI INTERFACE EXAMPLES ................................................................................
Step 1: Enabling Repeater Mode On DP750 ....................................................................................... 31 Step 2: DP760 DECT Repeater Association ........................................................................................ 31 Option 1: Auto Association............................................................................................................ 31 Option 2: Manual Association ..................................................................................
Table of Tables Table 1: DP760 Features in a Glance ......................................................................................................... 11 Table 2: DP760 Technical Specifications .................................................................................................... 11 Table 3: Equipment Packaging ................................................................................................................... 13 Table 4: DP760 LED Patterns ...............................
DOCUMENT PURPOSE This document describes how to configure DP760 DECT Repeater via Web GUI menu. The intended audiences of this document are VOIP administrators. Please visit http://www.grandstream.com/support to download the latest “DP760 User Manual”.
CHANGE LOG This section documents significant changes from previous versions of administration guide for DP760. Only major new features or major document updates are listed here. Minor updates for corrections or editing are not documented here. Firmware Version 1.0.3.7 This is the initial version for DP760.
GUI INTERFACE EXAMPLES http://www.grandstream.com/sites/default/files/Resources/DP760_web_gui.zip 1. Screenshot of Login Page. 2. Screenshots of Status Pages. 3. Screenshots of DECT Pages. 4. Screenshots of Network Settings Pages. 5. Screenshots of Maintenance Pages.
WELCOME The DP760 is a powerful DECT Repeater that auto associates to Grandstream’s DP750 Base Station to offer extended mobility to business and residential users. It extends an additional range of 300 meters outdoors and 50 meters indoors to give users the freedom to move around their work or home space, delivering efficient flexibility. This DECT Repeater relays up to 2 concurrent HD calls, or 1 HD call in daisy chain.
PRODUCT OVERVIEW Feature Highlights The following table contains the major features of the DP760: Table 1: DP760 Features at a Glance DP760 5 Stations in star. 2 Stations cascaded in daisy chain. 2 Concurrent HD calls / 1 HD call in Daisy Chain. PoE power support. 300m range outdoor / 50m range indoor. Auto association in star or daisy chain per optimal coverage.
Security User and administrator level access control, MD5 and MD5-sess based authentication, 256-bit AES encrypted configuration file, HTTPS, 802.1x media access control, DECT authentication. Multi-language English, Czech, German, Spanish, French, Hebrew, Dutch, Japanese, Chinese Simple, Chinese Tradition, Korean, Portuguese, Turkish. Upgrade/ Firmware upgrade via TFTP/HTTP/HTTPS. Provisioning Multi Line Access Up to 5 stations in star. Up to 2 stations cascaded in daisy chain.
GETTING STARTED This chapter provides basic installation instructions including the list of the packaging contents and also description of the LED patterns. Equipment Packaging Table 3: Equipment Packaging DP760 1 DECT Unit. 1 Universal power supply 5V. 1 Ethernet cable. 1 Quick Start Guide. 1 GPL Statement. Figure 1: DP760 Package Content Note: Check the package before installation. If you find anything missing, contact your system administrator.
Figure 3: Connecting the Repeater Station Connecting via PoE To connect the DP760 DECT Repeater using PoE, you need to connect the Ethernet cable provided (or 3rd party network cable) between the Network Socket on the repeater station to Ethernet port of your PoE switch/hub.
Figure 4: Daisy Chain Mode Configuration Figure 5: Star Mode Configuration In star mode configuration, the coverage area of the repeaters should overlap the coverage area of the base station.
DP760 LED Patterns The DP760 has 5 LED lights. Please refer to following table describing the status of each LED. Figure 6: DP760 LED Patterns Table 4: DP760 LED Patterns LED Status Indicates Power ON/OFF. Indicates access to the network. Solid ON: When there is access to the network. Blinking: If there is no access to the network. Indicates status of the association between DP760 and DP750 Blinking: When the DECT station is scanning for available RFPs.
CONFIGURATION GUIDE The DP760 can be configured via the Web GUI embedded using PC's web browser. By default, DP760 is configured to obtain IP address from DHCP server where the unit is located and can be also discovered using UPnP feature (by default enabled). Configuration via Web Browser The DP760 embedded Web server responds to HTTP/HTTPS GET/POST requests. Embedded HTML pages allow a user to configure the DP760 through a Web browser such as Google Chrome, Mozilla Firefox and Microsoft’s IE.
Saving the Configuration Changes After users make changes to the configuration, pressing the Save button will save but not apply the changes until the Apply button on the top of web GUI page is clicked. Users can instead directly press the Save and Apply button. We recommend rebooting or powering cycle the phone after applying all changes.
Figure 7: User Level Password Note: DO NOT USE same password for both user and admin accounts. Changing Admin Level Password 1. Access your DP760 DECT Repeater web UI by entering its IP address in your favorite browser. 2. Enter your admin’s username and password. (Default username and password: admin/admin) 3. Press Login to access your settings. 4. Go to Maintenance > Web/SSH Access. 5. In Web/SSH Access page, locate Admin Password section: a. Type in your new Admin Password in New Password field. b.
Figure 8: Admin Level Password Note: DO NOT USE same password for both user and admin accounts. Changing HTTP/HTTPS Web Access Port 1. Access your DP760 DECT Repeater web UI by entering its IP address in your favorite browser. 2. Enter your admin’s username and password. (Default username and password: admin/admin). 3. Press Login to access your settings. 4. Go to Maintenance > Web/SSH Settings. 5. In Web/SSH Settings page, locate HTTP / HTTPS Web Port field and change it to your new HTTP/HTTPS port.
Figure 9: Web Access Port Web Configuration Definitions This section describes DP760 options available in its Web UI. As mentioned, you can log in as an administrator or an end user. Status: Display the system info, network status, DECT status options. DECT: Configure DECT general settings, repeater name and RFPI manual configuration. Network Settings: Configure network basic and advanced settings.
Repeater is searching for the requested RFP: DP760 DECT repeater is searching for DP750 base station configured RFPI. (During manual association) Note: The following message “Repeater is operational after auto configuration procedure first time” appears briefly during DP760/DP750 association.
Software Version Firmware Status: Displays the status of the firmware loaded. Check for new firmware: Check configured server for most recent firmware version and compare to current version. After pressing button, you must reload this page to display status (navigate to a different page and then back to this page) and check firmware availability. Boot: Specifies Boot version. Current is 1.0.3.7 Core: Specifies Core version. Current is 1.0.3.7 Base: Specifies Base version. Current is 1.0.
Network Settings Table 7: Network Settings Pages Definitions Network Settings – Basic Settings IP Address Mode Selects IP address mode (DHCP, Static IP or PPPoE) for DP760 DECT Repeater. Preferred DNS Specifies preferred DNS server to use when DHCP, PPPoE or Static mode is set. Server DHCP Settings Host name Specifies the name of the client. The name may or may not be (Option 12) qualified with the local domain name. This field is optional but may be required by ISP.
Layer 2 QoS Sets layer 2 QoS 802.1p priority value for SIP signaling. 802.1p Priority Default is 0. Value for SIP signaling Layer 2 QoS Sets layer 2 QoS 802.1p priority value for RTP media. 802.1p Priority Default is 0. Value for RTP media UPnP Discovery Enable UPnP Settings discovery Enables UPnP discovery feature. Default is Yes. UPnP discovery Specifies in seconds the interval to send out SSDP notifies. notify interval Default is 30 .
Firmware File Checks if firmware file is with matching prefix before downloading it. This field Prefix enables user to store different versions of firmware files in one directory on the firmware server. Firmware File Checks if firmware file is with matching postfix before downloading it. This field Postfix enables user to store different versions of firmware files in one directory on the firmware server.
Verify host when Verifies host name in server certificate when using HTTPS. Default is Yes. using HTTPS Provisioning via Selects provisioning method: TFTP, HTTP or HTTPS Config Server Sets IP address or domain name of configuration server. The server hosts a copy Path of the configuration file to be installed on the DP760. Default is fm.grandstream.com/gs. Config File Checks if configuration files are with matching prefix before downloading them.
Web/SSH Access User Password Configures user level password. Case sensitive and max length is 30 characters. Confirm Password Configures the new user password again to confirm. Admin Password Configures admin level password. Case sensitive and max. length is 30 characters. Confirm Password Configures the new admin password again to confirm. Access Control White list for If white list exists, then only these IP addresses are allowed to Lists WAN side web and SSH access.
Allow DHCP Option Obtains time zone setting (offset) from a DHCP server using DHCP Option 2; it will 2 to override time override selected time zone. If set to “No”, the repeater station will use selected zone time zone even if provided by DHCP server. Default is Yes. Syslog Syslog Server Sets IP address or URL of system log server. The server collects system log information from the repeater station. Syslog Level Selects log level; the level is one of DEBUG, INFO, WARNING, ERROR (default is NONE).
Debug Tool Remote Log By clicking the submit button, you agree to allow the device to Submission - send these files to Grandstream to be used for troubleshooting Terms & purposes. If possible, please include a comment with information Conditions regarding the use of the device when the problem occurred. As an alternative to the device submitting the files, you may download the files below and submit them to Grandstream manually.
DP760 DECT REPEATER ASSOCIATION WITH DP750 Step 1: Enabling Repeater Mode On DP750 Before associating the DP760 DECT Repeater to your DP750 Base Station, you should firstly enable the repeater mode on your base station. Please refer following steps to enable the repeater mode on the DP750 base station: 1. Access the Web GUI of your DP750 using the admin’s username and password. (Default username and password is: admin/admin). 2. Navigate to DECT > General Settings and set Enable Repeater Mode to “Yes “.
3. 4. Open subscription on your DP750 Base Station using one of following methods: Rebooting the Base station. Long press on page/subscribe button on the back panel of DP750 for 7 seconds. Access DP750 Web GUI and press subscribe button . The DP760 DECT Repeater will automatically pair to DP750. Upon successful association with the DP750 Base station all LEDs will turn ON and the repeater status will be updated as following.
4. Click Save and Apply to confirm the new settings. 5. Open subscription on your DP750 Base Station using one of following methods: Rebooting the Base station Long press on page/subscribe button on the back panel of DP750 for 7 seconds Access DP750 Web GUI and press subscribe button . 6. The DP760 DECT Repeater will automatically pair to DP750. If the association is correctly associated, all the LEDs will remain solid on and the repeater status will be updated as following.
Associating DP760 using Repeater Management Mode on DP750 The repeater management mode displays discovered and paired devices using their name, IP and Mac addresses and also gives the possibility of associating the DP750 Base Station with DP760 DECT Repeater. Please refer to following steps in order to associate DP760 with DP750 using the repeater management mode: 1. Access DP750 Web GUI. (Default username and password are: admin/admin). 2. Navigate to Status > DECT Repeater Status. 3.
DP760 DECT REPEATER DISSOCIATION To disconnect DP760 DECT Repeater from the Base Station DP750, please refer to following options: Option 1: Using DP760 Web GUI To disconnect your DP760 DECT Repeater via web GUI, please refer to following steps: 1. Open Web browser on your computer. 2. Enter the DP760’s IP address in the address bar of the browser. 3. Enter the administrator’s username and password to access the Web Configuration Menu. (Default username and password: admin/admin) 4.
UPGRADING AND PROVISIONING The DP760 DECT Repeater can be upgraded via TFTP/HTTP/HTTPS by configuring the URL/IP Address for the TFTP/HTTP/HTTPS server and selecting a download method. Configure a valid URL for TFTP or HTTP/HTTPS; the server name can be FQDN or IP address. Examples of valid URLs: firmware.grandstream.com fw.ipvideotalk.com/gs Firmware Upgrade Procedure Please follow below steps in order to upgrade the firmware version of your DP760 repeater station: 1.
Figure 13: Firmware Upgrade Page Upgrading via Local TFTP/HTTP Servers For users that would like to use remote upgrading without a local TFTP/HTTP server, Grandstream offers a NAT-friendly HTTP server. This enables users to download the latest software upgrades for their devices via this server. Please refer to the webpage: http://www.grandstream.com/support/firmware Alternatively, users can download a free TFTP or HTTP server and conduct a local firmware upgrade.
Instructions for local firmware upgrade via TFTP: 1. Unzip the firmware files and put all of them in the root directory of the TFTP server. 2. Connect the PC running the TFTP server and the phone to the same LAN segment. 3. Launch the TFTP server and go to the File menu->Configure->Security to change the TFTP server's default setting from "Receive Only" to "Transmit Only" for the firmware upgrade. 4. Start the TFTP server and configure the TFTP server in the phone’s web configuration interface. 5.
RESTORE FACTORY DEFAULT SETTINGS Warning: Restoring the Factory Default Settings will delete all configuration information on the repeater. Please backup or print all the settings before you restore to the factory default settings. Grandstream is not responsible for restoring lost parameters and cannot connect your device to your VoIP service provider. Resetting DP760 Repeater Station There are two methods to reset your DP760 DECT Repeater to the default settings: Via Reset Button 1.
EXPERIENCING THE DP760 Please visit our website: http://www.grandstream.com to receive the most up- to-date updates on firmware releases, additional features, FAQs, documentation and news on new products. We encourage you to browse our product related documentation, FAQs and User and Developer Forum for answers to your general questions. If you have purchased our products through a Grandstream Certified Partner or Reseller, please contact them directly for immediate support.
Compliance FCC Notice This device complies with part15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
