User's Manual
Table Of Contents
- Users Manual DP760
- DOCUMENT PURPOSE
- CHANGE LOG
- GUI INTERFACE EXAMPLES
- WELCOME
- PRODUCT OVERVIEW
- GETTING STARTED
- CONFIGURATION GUIDE
- DP760 DECT REPEATER ASSOCIATION WITH DP750
- DP760 DECT REPEATER DISSOCIATION
- UPGRADING AND PROVISIONING
- RESTORE FACTORY DEFAULT SETTINGS
- EXPERIENCING THE DP760
- Users Manual DP760 FCC
P a g e | 13
DP760 User Manual
GETTING STARTED
This chapter provides basic installation instructions including the list of the packaging contents and also
description of the LED patterns.
Equipment Packaging
Table 3: Equipment Packaging
Note: Check the package before installation. If you find anything missing, contact your system administrator.
Connecting DP760
To setup the DP760 DECT Repeater, please follow the steps below:
Figure 2: DP760 Back View
There are two options to connect DP760 DECT Repeater: AC power or Power over Ethernet (PoE)
Connecting via AC power
1. Connect the micro-USB connector into the related port on the repeater station and connect the
other end of the power adapter into an electrical power outlet.
2. Connect the supplied Ethernet cable between the Internet port on the DP760 DECT Repeater and
the Internet port in your network or the switch/hub device port.
DP760
1 DECT Unit.
1 Universal power supply 5V.
1 Ethernet cable.
1 Quick Start Guide.
1 GPL Statement.
Figure 1: DP760 Package Content