User's Manual
Table Of Contents
- Users Manual DP760
- DOCUMENT PURPOSE
- CHANGE LOG
- GUI INTERFACE EXAMPLES
- WELCOME
- PRODUCT OVERVIEW
- GETTING STARTED
- CONFIGURATION GUIDE
- DP760 DECT REPEATER ASSOCIATION WITH DP750
- DP760 DECT REPEATER DISSOCIATION
- UPGRADING AND PROVISIONING
- RESTORE FACTORY DEFAULT SETTINGS
- EXPERIENCING THE DP760
- Users Manual DP760 FCC
P a g e | 16
DP760 User Manual
DP760 LED Patterns
The DP760 has 5 LED lights. Please refer to following table describing the status of each LED.
Figure 6: DP760 LED Patterns
Table 4: DP760 LED Patterns
LED
Status
Indicates Power ON/OFF.
Indicates access to the network.
Solid ON: When there is access to the network.
Blinking: If there is no access to the network.
Indicates status of the association between DP760 and DP750
Blinking: When the DECT station is scanning for available RFPs.
Solid ON: When the association between DECT repeater and Base station is
operational.
Indicates status of the association between DP760 and DP750 during calls.
Solid ON: When the association between DECT repeater and Base station is
operational and no active calls.
Blinking: During active calls.
Indicates status of the association link between the DP760 and DP750.
Solid ON: When the association between DECT and Base station is operational and
link is excellent.
Blinking:
Long ON, 1x short OFF if the association link is good.
Long ON, 2x short OFF if the association link is weak.
Long ON, 3x short OFF if the association link is poor