User's Manual
Table Of Contents
- Users Manual DP760
- DOCUMENT PURPOSE
- CHANGE LOG
- GUI INTERFACE EXAMPLES
- WELCOME
- PRODUCT OVERVIEW
- GETTING STARTED
- CONFIGURATION GUIDE
- DP760 DECT REPEATER ASSOCIATION WITH DP750
- DP760 DECT REPEATER DISSOCIATION
- UPGRADING AND PROVISIONING
- RESTORE FACTORY DEFAULT SETTINGS
- EXPERIENCING THE DP760
- Users Manual DP760 FCC
P a g e | 20
DP760 User Manual
Figure 8: Admin Level Password
Note: DO NOT USE same password for both user and admin accounts.
Changing HTTP/HTTPS Web Access Port
1. Access your DP760 DECT Repeater web UI by entering its IP address in your favorite browser.
2. Enter your admin’s username and password. (Default username and password: admin/admin).
3. Press Login to access your settings.
4. Go to Maintenance > Web/SSH Settings.
5. In Web/SSH Settings page, locate HTTP / HTTPS Web Port field and change it to your new
HTTP/HTTPS port.
Note: By default, the HTTP port is 80 and HTTPS port is 443.
6. Select the Web Access Mode depending on desired protocol (HTTP or HTTPS).
7. Press Save and Apply to save your new setting.
Note: A reboot is required for this change to take effect.