User's Manual
Table Of Contents
- Users Manual DP760
- DOCUMENT PURPOSE
- CHANGE LOG
- GUI INTERFACE EXAMPLES
- WELCOME
- PRODUCT OVERVIEW
- GETTING STARTED
- CONFIGURATION GUIDE
- DP760 DECT REPEATER ASSOCIATION WITH DP750
- DP760 DECT REPEATER DISSOCIATION
- UPGRADING AND PROVISIONING
- RESTORE FACTORY DEFAULT SETTINGS
- EXPERIENCING THE DP760
- Users Manual DP760 FCC
P a g e | 21
DP760 User Manual
Figure 9: Web Access Port
Web Configuration Definitions
This section describes DP760 options available in its Web UI. As mentioned, you can log in as an
administrator or an end user.
Status: Display the system info, network status, DECT status options.
DECT: Configure DECT general settings, repeater name and RFPI manual configuration.
Network Settings: Configure network basic and advanced settings.
Maintenance: Configure upgrading and provisioning, web/SSH access, date and time, and syslog,
packet capture and factory reset settings.
Status Page Definitions
Table 5: Status Pages Definitions
DECT Status
Repeater Name
Displays name of DECT repeater. Default is DP760_[last 6 digit of MAC address].
Repeater FW
Version
Shows firmware version of repeater station.
Repeater DECT RF
Region
Indicates region of repeater station. Example: EU, US, Auto…
Repeater Status
Describes the repeater status:
Scanning for available RFPs: DP760 is scanning and searching for
available RFPs (Radio Fixed Part Identity) address.
Repeater is in normal operation: DP760 DECT repeater is correctly
associated to DP750 base station and the link between them is operational.